Feature

●【Size】 - Fit tap size: M3-M8 (Mertic)/ 2mm-9mm, 250mm (9.84-inch) body length.
●【High Quality】 - All-steel design with chromium-plated finish for the highest durability
●【Feature】 - A switch on the shaft allows you three settings. Forward, reverse and lock positions.
●【Application Range】 - T handle tap holder is used for hand tapping taps, and also can be used with drills, reamers, screw extractors and other small tools that need to be rotated manually.
●【No Worries Service】- If you have any questions, we will reply to you within 24 hours, we would make sure you shop with satisfaction

[M3-M8 short]

[M3-M8 long]

[M5-M12 long]

Description

When tapping, every time the wrench rotates 1/2 turn, it should be reversed about 1/2 turn, so that the chips will be broken and discharged.
If it is difficult to rotate when tapping, do not increase the rotation force.
Need to withdraw the tap frequently to remove the chips in the hole. Taps of any size can be clamped within the clamping range.
After-Sales Service:
If you have any question, please contact us freely, we will reply you within 24 hours