Feature

●GOOD ANTI INTERFERENCE: The RTL SDR receiver has good anti interference performance and strong signal receiving ability
●MULTI MODES: The receiving module supports various modes, which are NFM, FM, DSB, USB, LSB and CW, which is convenient to use
●EASY TO USE: The software receiver can be connected to computers, mobile phones and other devices using SDR software
●HIGH PERFORMANCE: Shortwave directly inputs the signal received by this to the digital to analog conversion chip, perfectly solves the problems of signal loss, noise, waveform clutter, frequency offset, etc.
●LONG LAST DURABILITY: The software defined set shell is made of high strength ABS plastic material, with good toughness and long last durability

Description

How to Use:
1. Can be used to test received from VHF/UHF bands.
2. If the received signal strength from VHF/UHF is not the best, can be used to receive nearby such as FM stations.
3. For best effect, you need to connect the relevant high frequency, such as long wire, random wire, dipole, etc.

Specification:
Item Type: RTL SDR Receiver
Material: ABS
Colour: Black
Features:
1. Fully assembled, can use directly
2. Using R820T2 chip set
3. 100KHz to 1766MHz operating frequency
4. Cover VHF and UHF bands from 24-1766MHz
5. Up to 3.2 million sample rates(~2.8 MHz stable)
6. Receiver Modes: NFM, FM, DSB, USB, LSB and CW
7. Depending on the SDR software used by the receiver
8. 8 bit ADC, can provide about 50dB of dynamic range
9. 50ohm input impedance
10. Dual SMA gold connectors
11. Diode protection on RF input
12. Aluminum plate
13. LED power and band indication
14. 40MHz local oscillator for HF conversion
15. DBM Balanced Mixer
16. Small size board
17. Free software
18. Separate inputs for SW and VHF
19. The USB computer connection (mini usb) is powered by normal USB
20. Very high dynamic range
21. Accurate and efficient strip filter
22. Very clean audio reception

Package List:
1 x RTL SDR Receiver
1 x USB Cable