[111]
[1]
[10]
Concord Wallcoverings 3D wall panels are designed to add a natural look to the chosen wall of your house or commercial property. 3D wall panels will give a unique and elegant atmosphere to any space: kitchen backsplash, living room accent wall, office interior design, restaurant hall walls or any other room. Take your wall décor to the next level by installing your chosen wall panel! Our 3D panels are easy to install with a cove base adhesive. It’s easy to cut and fit into any wanted space. Our panels are certified water-proofed and fire-resistant rated; these décor elements are easy to clean and maintain.
What are the main usages of 3D Wall panels?
· In the resend years, accent wall (or featured wall) is in trend in Europe and North America. 3D wall panels is the best wall décor element for accent wall – be it bedroom, living room, meeting room wall at the office or commercial property like restaurant.
· Because PVC panels are fire rated, they are the perfect material for fireplace framing, although its recommended to use them for electrical or gas fireplace; a real wood fireplace should be framed with real stones.
· PVC panels are also water-resistant thus these are the first choice of builders and interior designers for backsplash – in kitchen or bathroom
You would need: | a. Measurement ruler b. Glue on polymer or alcohol base c. Painter’s tape d. Strong scissors e. Level |
Step 1: | Clean the wall surface from dust, send bumps and rough spots and prime the wall. |
Step 2: | Measure your wall footage, calculate the amount of required units and prepare the panels |
Step 3: | You would need to start from the top left edge; if your wall panel has a serrated pattern for interlocking pieces together, make a clean and straight cut of the left edge. · In case you are using J-trim to make the shoulders more appealing, start with gluing your j-tip first and interlock the first panel into it. |
Step 4: | If you are applying a flat panel, apply the glue on the wall and gently paste the panel. If you have raised texture panel, apply the glue on the back of the panel, at the spots that touch the wall and gently paste the panel. |
Step 5: | Adjust next panel and keep repeating step 4 from left to right until you reach the end of your paneling line (right wall or the far right spot you want to apply). |
Step 6: | Repeat steps 3 to 5 for each new line of wall panels. · On the right side of the panels you will see projecting parts that are matching the next panel interlocking pattern; apply a small amount of glue onto these parts, remove excessive glue after sticking the next panel on top of these projecting parts. · To support your panels and prevent them from slipping down while the glue is drying, temporarily fix them with painter’s tape. |
Vintage Brick in White | Faux Brick in Red | Wild Stone in Brown Beige | Old Brick in Red | Wild Stone in Grey | Old Brick in White | |
---|---|---|---|---|---|---|
Pattern Number | 569BC | 570TG | 563WB | 572OR | 562WG | 571OG |
Material | PVC | PVC | PVC | PVC | PVC | PVC |
Size | 17.5" x 23.75" (1 panel) | 17.5" x 23.75" (1 panel) | 17.5" x 23.75" (1 panel) | 17.5" x 23.75" (1 panel) | 17.5" x 23.75" (1 panel) | 17.5" x 23.75" (1 panel) |
Cover Area | 2.78 sq.ft. | 2.78 sq.ft. | 2.78 sq.ft. | 2.78 sq.ft. | 2.78 sq.ft. | 2.78 sq.ft. |