Feature(may vary by option.)

●【Type-C Port Hardwire Kit】11.5ft Type-C hardwire kit for dash cam or other device powered by Type-C USB port, 5V/2A steady output, voltage input supports from 12V-24V.
●【Hardwire Kit INSTALL】 Connect the hardwire kit to the car fuse box instead of using the car charger connection, , instead its a permanent hidden cable, and very easy to install.PLEASE note: connect the red cable on the hardwire kit to ACC, the yellow cable to BATT, and the black cable to GND (the metal part of the car)
●【24H PARKING MONITOR】 Connected hardware kit can be turned on in the settings to use parking monitoring mode. When the car is turned off,It can keep powered on for 24 hours to protect your car
●【Low Voltage Protecting】Multiple Security Protection - With low voltage protection, REDTIGER hardwire kit will automatically cut off the power after 60s when the voltage is lower than 11.8V（+-0.2).Will not cause the problem of exhausting the car battery, Not applicable to trucks with voltage above 24V. More security protection like over-current, short-circuit, reverse connection, and overheat.
●【WORRY FREE SERVICES】 1 year free-replacement warranty for quality problems.If you have any questions, please feel free to CONTACT us.

[Single fuse-Type-c port Single fuse-Type-c port]

[Black Muti-Size]

Description

The REDTIGER Dash Cam Hardwire Kit compatible with USB-C F17/F9/T27/T700 Dash Cams.

-Warm tips:

1. Please make sure the ACC and BAT is connected correctly.

2. Please feel free to reach us if any professional help in need.

3. Please use the dedicated hardwire kit for the REDTIGER F17/F9/T27/T700 dash cam, Because the other brands of hardwire kits are not available for Redtiger dash cams.

4. The length of this hardwire kit is 11.5ft, suitable for most trucks, SUVs and other vehicles.

5. Please note that installation steps may vary by vehicle model and specific conditions. It is strongly recommended to refer to the vehicle manual or seek professional help before installation.

-Instructions for installation

1. Make sure everything is ready and safe before installation.

2. Locate the cars fuse box. It is usually located under the dashboard on the drivers side or in the engine compartment.

3. Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power when the ignition is on. Locate the constant power fuse slot in the fuse box. This slot provides power even when the ignition is off.

4. Connect the red wire from the hardwire kit to the ACC fuse slot. Connect the yellow wire from the hardwire kit to the constant power fuse slot. You can use a fuse tap or a fuse adapter to make the connection.

5. Find a suitable grounding point near the fuse box. It should be a metal surface that is securely connected to the vehicles chassis.

6. Connect the black wire from the hardwire kit to the grounding point using a ring terminal or a suitable grounding connector.

7. Once all the connections are secure, tuck away any excess wires and ensure they are safely routed to avoid interference with the vehicles controls.

8. Test the hardwire kit by turning on the ignition. The dash cam should receive power and start functioning.


Low Voltage Protection Ensure the safety of your vehicles battery with the Redtiger Hardwire Kit. It features a low voltage protection mode that cuts off power when the voltage drops below 11.8V(+-0.2).	Universal Compatibility Designed to fit various vehicle models, the 11.5ft long Redtiger Hardwire Kit is compatible with 12-24V vehicles, providing a versatile solution for your dash cam installation needs.	24H Parking Monitoring and G-Sensor The Redtiger hardwire kit connected to car fuse box power, can uninterruptedly supply power for dash camera for 12/24/48 hours. It can even supply power when the car is turned off. You can also set Gsensor for the dash cam, when your vehicle suffers from vibration or collision, it will automatically start recording and lock the key video.

Install Tip:


The B+ (yellow) The yellow cable should be connected to the fuse of the constant power supply in the car fuse box. Testing method: The tester bulb will light evenwhen the engine is off.	The ACC (red) Identify the ACC (Accessory) fuse slot in the fuse box. This slot provides power when the ignition is on. Testing method : The tester bulb will light when the engine is on and wont light when the engine is off.	The Ground (black) This black cable is connected to the metal parts of the vehicle. There are screw nails and metal parts near the fuse boxes in many cars. Connect the black cable to the screw or metal part.


	F9	F17	T700	T27	Hardwire kit
Video Resolution	3840*2160P+1080P	3840*2160P+1080P+1080P	3840*2160P+1080P	38402160P+25601440P	✘
Camera Type	Front+Rear Mini Dash Cam	Front+Inside+Rear dashcam	Front+Rear Mirror Dash Cam	Front+Rear Mirror Dash Cam	USB C Hardwire kit
Wi-Fi	✓	✓	✘	✘	✘
GPS	✓	✓	✓	✓	✘
SD card included	32GB TF Card Included	64GB TF Card Included	32GB TF Card Included	32GB TF Card Included	✘
Storage/Battery Type	256G Max, Super capacitor	Type-C Port/,DC12V/24V, 2.5A	128G Max, Super capacitor	128G Max, Super capacitor	✘

Low Voltage Protection

Universal Compatibility

24H Parking Monitoring and G-Sensor

Install Tip:

The B+ (yellow)

The ACC (red)

The Ground (black)

Videos for this product