Feature
●ARC Function (Audio Return Channel): Extractor the Audio from TV to Soundbar or Amplifier. Please connect your TV HDMI(ARC) Port to Tendak Audio Adapter HDMI Output Port with HDMI Cable, then optical cable/ L/R or 3.5mm headphone to the soundbar, Speaker, home theater, A/V receivers etc.
●192KHz Sampling Rate Achieved - It Actually Supports Sampling Rate at 32, 44.1, 48, 96 and 192 KHz, and 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels. Pleasae use HDMI 1.4 cable (19+1), Please note: Need to manually adjust the volume of the speaker. TV remote cannot change audio volume, and TV remote cannot change audio volume
●Audio Output Simultaneously - This HDMI ARC Adapter can send audio from TV (Support ARC function) to Optical/ Coxial/ 3.5mm/ L/R audio through ARC Adapter via HDMI/ARC interface and out audio simultaneously. (NOTE: It is Incompatible Dolby AC3/ Dolby Digital Plus etc., Please Set the Audio Output to PCM or LPCM before Using)
●Widely Used: Compatible with all HDTVs with ARC function. SPDIF/Coaxial, Optical, RCA and 3.5mm headphone jack 4 output ports are available, which perfectly solves the interface compatibility problem between TV and audio system. It can be used for speakers, amplifiers, soundbars, active speakers, wired headphones and other receiving devices to provide diversified listening experience.
●What You Will Get - 1xARC Adapter, 1xUSB power supply line, 1xUsers Manual, One Year Limited Manufacturers Warranty by Tendak. NOTE: When using the ARC function, the volume needs to be adjusted by your audio device. Make sure it is the HDMI ARC port of the connected TV and switch to the "on" state.If the ARC does not work, try unplugging the cable or change HDMI cable, wait a few minutes to reconnect, and plug the converter into a power source.
Description
Tendak ARC Audio Extractor with Digital Optical TOSLINK SPDIF/Coaxial and Analog 3.5mm L/R Stereo Audio Converter
HDMI ARC Adapter will send audio from internal TV source (like built-in web streaming apps, the HDTV tune) back down the HDMI cable to ARC converter then optical cable/ L/R or 3.5mm headphone to soundbar, Speaker, home theater, A/V receivers etc.
Specification:
Input Port: 1 x ARC IN
Audio Output Port: 1 x optical, 1 x Coaxial, 1 x L/R, 1x 3.5mm
Material: Aluminum Alloy
Power Supply Interface: Micro USB
Maximum operating current 65mA
Power Adapter specification: AC 100V-240V50/60HZ,DC 5V /1A
Note:
1. Please sure your TV have HDMI(ARC) Port
2. Please open your TV and ARC Converter ARC function before you use it
3. This HDMI ARC Adapter doesnt support Dolby AC3/ Dolby Digital Plus etc. 5.1 ch Audio, Please Set the Audio Output to PCM or LPCM before Using
4. If the ARC does not work, try unplugging the cable or change HDMI cable, wait a few minutes to reconnect, and plug the converter into a power source
5. When using the ARC function, the volume needs to be adjusted by your audio device
6. 3.5mm L/R channel provides analog sound
7. When it does not work, please try to replace the HDMI cable and reconnect it
8. You can use the TV remote control to control the output volume of the HDMI ARC Adapter 3.5mm and RCA interface, but TV remote control cannot control the coaxial and optical volume
|
|
|
|
|---|---|---|
HDMI ARC PortPlease connect the TVs HDMI (ARC) port to the adapters HDMI port to send audio from the TV (which supports the ARC function) to the ARC adapters Optical/Coaxial/3.5mm/L/R audio and output audio at the same time. |
192KHz Sampling RateActual support for 32, 44.1, 48, 96, and 192 KHz sampling rates, and 24-bit S/PDIF input bitstreams for left and right channels. |
Wide ApplicationsCompatible with all HDTVs with ARC function and all Soundbars, speakers with optical/coaxial/L/R/3.5mm audio output port devices. Ideal for home theater, work meetings, projectors, gaming and more. |
Note:
When you find that the adapter connected to your input device ARC does not work, please make sure you are connected to the HDMI (ARC) port of the input device
Please keep the audio format of the input device and soundbar consistent
It is Incompatible Dolby AC3/ Dolby Digital Plus etc., Please Set the Audio Output to PCM or LPCM before Using)