Feature

●4 M2 screw holes for easy installation.
●4-digit LED display module with LED brightness adjustable and clock point.
●Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable.
●The driver IC is TM1637, only two signal lines can make MCU control four Digit 8-segment LED. Can be used to display decimal, letters and so on.
●Control interface: a total of 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin.


Description

Description:
The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module for driver TM1637; only two signal lines can make the MCU control 4 bits 8 digital tube.

Parameter:
Supply voltage: 3.3V--5v DC
Module current: 30--80MA (when 5V supply power)
Module size: Approx. 42 x 24 x 11mm / 1.65 x 0.94 x 0.43 inch (not include pin), 48 x 24 x 11mm /1.88 x 0.94 x 0.43 inch
Control port: 4 common anode score points with 0.36 inches LED, red highlights
Location hole: 4pcs M3 screw location hole, hole diameter: 2.2mm, the positioning of the module is easy to install, to achieve inter- module combination

Package Included:
2* 4-Bit LED Digital Tube Module