Feature(may vary by option.)

●* Faster printing speed，mono LCD request less exposure time to save your printing time
●* More durable in lifespan, run long under UV light, 10x lifespan compare with original screen
●* Easy to upgrade, only takes a few minutes with several screws
●* Sturdy packaging,the monochrome LCD Screen replacement is packaged in a sturdy box, allowing our products to be delivered in perfect conditions
●* Dont forget to update firmware, you can find it on chitusystems website or the user manaul

[screen kit for Mars Pro]

[Mars screen+5pcs protect films]

[Mars Pro screen+3pcs protect films]

[Mars Pro screen+5pcs protect films]

[Screen kit for Mars]

Description

6.08 Inch Mono LCD Upgrade Kit for Elegoo Mars/Mars Pro,2K Light Curing Print Screen Replacement,with 1620x2560 Resolution

Why to upgrade?

The original ELEGOO Mars and Mars pro come with the Sharp04 screen, which is 5.5 inch 2K RGB LCD, since 2018 there are Mono LCD come out, and it is been widely use during 2019, the Phrozen sonic Mini, Anycubic Photon mono series and ELEGOO mars 2 series. we also write an article about RGB vs Mono, you can check on chitu systems website.

Now most new resin 3d printers come with Mono screens, and even with 8K level resolutions.

In General, Mono screen has 3 advantage compare with RGB LCD.


More durable in lifespan The mono LCD has a process optimization, which makes the screen can run for a long term under UV light, it is suspected to work over 2000 hours. and the RGB LCD can only work half of that.	Higher light transmittance The mono screen has three times higher light transmittance than the RGB screen.	Faster printing speed The mono LCD has a better UV light transmittance, which means when you use the same resin, it takes less time to make it cure, and in the Chitubox setting you will only need an exposure time of around 2.5s. In RGB LCD the exposure time is about 8s~12s. Each layer saves you a few seconds, if you print a large file, it is much faster.