Feature
●Set of 2 pack(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), designed for 12v system. left light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker and License Illuminator, right light has functions as Stop/ Turn/Tail Rear/ Side reflector Side Marker
●IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards.
●Compliant with DOT standards: The lamp shade of utility trailer light kit with a new ABS material, 100% compliant with DOT standards
●Easy to instal, The distance of two studs bolts is standard 2”, Direct replacement for your original incandescent bulb unit
●Widely Used : Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater.
Description
Submersible LED Trailer Light combination parking lights, taillights, turn signals, keep you driving safety.
Fitment:
Suitable for trucks, trailers, ships, buses, trucks, trucks, caravans, snowmobiles and other 80-inch-wide trailers.
Feature:
- Superior quality guaranteed for years of use.
- Unique halo glow pattern when lit
- 7-function: stop, turn, tail, rear clearance, rear reflex, side marker, and side reflex
- The circuit board is sealed, IP68 waterproof
-Corrosion proof plastic housing, Compliant with DOT standards
Package Include:
2x running/stop/tail/turn signal lights
4pcs reflective sticker
Screws and Nuts
Easy to installation
Left side: White Wire is the Ground; White+Yellow, front side works as high brightness; White+Brown, Three sides work, front side is low brightness.
Right side: White Wire is the Ground; White+Green, front side works and is high brightness; White+Brown, Two sides work, front side is low brightness.
Specifications
Working Voltage: DC 12V
Number of LED:
Left tail light: 48 Diodes ( 16 Red diodes for halo light+20 Red diodes for front light+3 Red diodes for side light+9 White diodes for license Plate illumination )
Right tail light: 39 Diodes ( 16 Red diodes for halo light+20 Red diodes for front light+3 Red diodes for side light )
Material: ABS Housing + PC Lens
Shape: Rectangular
Waterproof Rate: IP68
Lifespan: Over 50000 Hours
Dimension: 8.3*3.3*2.9 Inch
|
|
|
|
|---|---|---|
Super BrightSuper bright LED diodes with super high visibility, light up the rear of your vehicle or trailer in daylight, midnight, raining or fog days etc any weather condition. |
IP68 WaterproofThe circuit board of tail light is seal. A drain hole is designed to pull out all the water. So the water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible. |
Sturdy Shell HousingThe lamp shade of utility trailer light kit with corrosion resistant ABS material, protect the whole LED light bar effectively. Build a red reflection into the red portion of the lens |
