Feature

●120 VAC Mash Tun or RIMS ()Recirculation Infusion Mash System) Tube Controller for water heater, boil coil and similar style elements up to 2250 Watts** All Metal (aluminum) housing
●The 120V Blichmann BoilCoil and similar elements with a L5-20P type twist lock plug will plug directly into this controller with no modification or additional adapter.
●Includes temperature alarm and Water Tight PT-100 RTD Sensor with 1/2" MPT Threads - includes 1/2" FPT SS lock nut and silicone washers
●8 Power Cord with 3 prong plug and All aluminum housing for safety. Includes pump control switch and outlet.
●**Make sure the circuit you are using is rated for the Amps your element is designed to draw! For example the 120V 2250 Watt Blichmann BoilCoil draws 18.75 Amps.


Description

Our 120V mash controller has a fully grounded 8 foot power cord with 3 prong plug and twist lock 20A socket. Includes a mushroom style on/off and panic stop switch. Designed to work with up to a 2250 watt 120V electric heating element. Because of lower wattage available from 120V heating elements we do not recommend using our 120V mash tun temperature controller to raise your mash water to initial strike temperature. Instead you will need to raise your initial mash temperature with outside heat like a separately heated hot liquor tank or direct gas fired heat. But once you have your initial heat applied this controller will have no problem maintaining your mash temperature or advancing to the next temperature during a stepped mash.