Feature(may vary by option.)
●【Note】Recommended speed of countersink drill bit: 500-1500RPM . The harder the plate and the larger the diameter of the chamfering drill, the slower the required speed, and it is recommended to use with cutting fluid to reduce wear.
●【Material】 High speed steel 4241. It is suitable for softer materials with hardness below 25°, such as thin iron plates, insulating plates, and PVC plates. It is not suitable for materials that are too thick or too hard.
●【Size】Chamfer Range:2-5mm, 5-10mm, 10-15mm, 15-20mm；Shank Diameter: 6mm, 8mm, 10mm, 12mm；Head Diameter: 10mm, 14mm, 21mm, 33mm.
●【Tips】There may be slight burrs on the surface of the product, but it does not affect the use.If you have any questions about the product, please feel free to contact us, we will try our best to solve the problem for you .
●【Package Included】4 x Countersink and Deburring Tool.
●【Wide Range of Use】 Suitable for processing and reaming of steel, iron, aluminium alloy, copper, wood, plastic and other materials, not for direct use in opening holes. Tile, concrete, walls, stone, etc. are not allowed to be used.
●【Suitable Machines】Suitable for drilling machines, table drills, machining centres, milling machines.But hand drills are not allowed.
●【Choose the Right Size for the Job 】 For example, if you need to chamfer to 16mm, you need to choose the 15-20mm countersink drill that covers the working range.
[HSS 4241]
[M2-Titanium]
Description
Highlight
|
|
|
|
|---|---|---|
Tips
|
Good Quality
|
Sharp and Durable
|
Please follow the following steps to use
- 1.Use twist drill bit,drill a guide hole according to the size chamfering tool.
- 2.Select the appropriate size chamfering tool to ream the drill.
- 3.Install the screws and be flush with the surface.
Product Sizes
- Size(four type): 2-5mm,5-10mm, 10-15 mm, 15-20mm
- Length:2-5mm:44mm; 5-10mm : 48mm ;10-15mm : 65mm ;15-20mm: 83mm
Suitable Machines
- Suitable for drilling machines, table drills, machining centres, milling machines.But hand drills are not allowed.