Feature

●Fitment: Test Fitting Tool Compatible with Ford 6.0L powerstroke diesel high pressure oil system
●【High Quality】 High Quality Machined from steel with excellent mechanical and physical properties, this fitting shows high tightness, corrosion resistance and durability.
●【Features】NO Scan tool or IPR driver tool is required, It allows systems with the latest updated standpipes to be tested.
●【Design】 The o-ring groves, the o-rings and the HPOP they thread into have perfect fit. NO skiving of inner o-ring when installed.
●【Usage】This tool has 1/4 inch pipe threads to accept standard air fittings; It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.


Description

High Pressure Oil Pump IPR Valve Air Test Fitting Tool High Pressure Oil Pump IPR Valve Air Test Fitting Tool
FitmentFitment

  • Fitment: Test Fitting Tool Compatible with Ford 6.0L powerstroke diesel high pressure oil system

ApplicationApplication

  • Application:
  • 2004-2010 Ford E-350 / E-450 - - - 6.0L V8 Diesel Turbocharged
  • 2003-2010 Ford Excursion - - - 6.0L V8 Diesel Turbocharged
  • 2003-2010 Ford F-250 / F-350 / F-450 / F-550 - - - Super Duty 6.0L V8 Diesel Turbocharged
  • (Note: Our tool has 1/4 inch pipe threads to accept standard air fittings)

Package includedPackage included

FitmentFitment

Notes for usageNotes for usage

  • Package included:

1x Oil Pump IPR Valve Air Test Fitting Tool

  • Features: NO Scan tool or IPR driver tool is required Great quality will stand up to heavy use. Its even perfect for professional mechanic Allows systems with the latest updated standpipes to be tested

  • Notes for usage:
  • The complete system can be tested in under 20 minutes - in a professional repair facility this tool will pay for itself after one or two repairs. To connect, just remove the air cleaner, FICM, and coolant degas bottle (Turbo removal is NOT required). Remove the IPR valve and thread in the tool, hand tightening using the hose is sufficient.
  • Connect shop air and listen for leaks. To locate the smallest leaks close the shutoff valve on the tool to seal the system. If desired a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading. This is not a required step.
  • To prevent costly combacks we recommend air checking every 6.0L for high pressure oil leaks after any part of the system has been disassembled.

Product information