Feature●Combines audio codec, CAT control and PTT switch using a single USB connector to computer●Works for HF, VHF, UHF. Use it with FT8, FT4, JS8Call, RTTY, SSTV, WinLink, APRS, VaraHF, VaraFM, Soundmodem●Allows fully featured CAT control in capable transceivers and reliable adjustments free PTT with HTs and basic mobile radios●Pre-made transceiver cables are available for popular Yaesu, ICOM, Kenwood, Elecraft, Baofeng, Xiegu, Lab599 and other brands. Trivial homebrew cable build with instructions in the community forum.●The interface works with all major OS flavors: Windows, MacOS and Linux. Driver update may be needed in some systems - see instructions for the link.●CAT interface in this listing is pre-configured for logic levels and can be changed to RS-2323, TX-500 or CI-V. See digirig website for additional information.●Tutorials, troubleshooting guide, vibrant community forum are available if you have any questions or. You can also post in Q&A section of this listing if you have a question or need help●Thank you for considering Digirig. I hope to see you on the air. 73 de K0TXDescription
Digirig Mobile is a digital modes interface for amateur radio. This listing is for revision 1.9 using TRRS connectors. Backward compatible to rev 1.6
- combines audio codec, serial CAT interface and PTT switch
- supports full featured CAT interface: PTT, bands, tuning etc. (not just VOX based PTT)
- uses a single USB connection to computer minimizing the cables mess
- serial computer aided transceiver (CAT) port can be configured for logic levels, RS-232, CI-V or TX-500
- works with all major OS flavors: Windows, MacOS and Linux
- permanently available independently from CAT port an open-collector PTT switch controlled by RTS signal of the COM port to interface HTs and mobile radios
- axillary connection points to CM108 codec - for simple Allstar homebrew node builds
- uses widely supported CP2102 serial interfaceand CM108 audio codec (generic audio device - no driver necessary)
- small rugged aluminum enclosure ideal for mobile operations
- interfaces the transceiver using widely available 3.5mm jacks (TRRS) for simple homebrew cable builds
- growing collection of pre-made cables including popular Icom, Yaesu, Elecraft, Baofeng, Xiegu transceivers
- isolation can be easily added using inexpensive USB isolator dongle
Notes regarding the interface configuration:
- Audio + PTT are always available independently from serial CAT and they work for minimum required digital modes configuration with any radio
- CAT configuration is done with solder jumpers and can not be changed operationally
- Check the transceiver cables listing for your radio. The description will have CAT configuration requirements
- Learn more about CAT configurations at digirig website
This listing does not include cables. The USB cable is a standard USB Type-C cord which must support both power/charging and data. Please refer to the digirig website for configuration information and schematic containing the pinout reference if building homebrew cables.