Feature
●★【Special machine for removing carbon deposits】HTS558 fuel system cleaning tool is a special machine for cleaning the carbon deposits on the intake pipe and the back of the intake valve of the automobile engine, which can deeply remove the high-viscosity carbon deposits on the intake manifold and intake and exhaust valves. After cleaning, the engine can be kept in a healthy state and ensure the efficient operation of the engine.
●★【Simultaneous injection and recovery】Walnut blaster special machine for cleaning the back of the engine intake pipe and intake valve. After closing the intake valve, the walnut sand is sprayed into the engine air intake through the air pump (not included), and the HTS558 recovers the walnut sand through vacuum. Because these two operations form a closed loop, walnut powder will affect the carbon deposition on the inner wall of the intake pipe.
●★【Why choose walnut sand cleaning】 Carbon deposits will reduce the air-fuel ratio, reduce engine output, increase fuel consumption, and cause great damage to the engine. When the combustion in the engine is not sufficient, some hydrocarbon olefin residues will adhere to the engine intake port and cylinder, and the residues on the engine intake port and cylinder will become carbon deposits under the action of high temperature.
●★【High-quality material to avoid damage to the machine】 The walnut sand used in HTS558 is a pure natural polishing material. It shows high performance in terms of hardness, compression resistance and wear resistance. Chemical cleaners can corrode the lines and shorten the life of the engine. Cleaning the engine with walnut sand can not only clean the intake pipe and intake valve thoroughly, but also will not cause damage to the engine.
●★【Ultra-high efficiency】 HTS558 can clean one intake pipe at a time, and the cleaning time of one intake pipe is about 1-3 minutes (the specific time depends on the degree of accumulation of carbon deposits), and the six-cylinder engine needs to be cleaned 6 times once (this And so on), very efficient and practical.
Description
The HTS558 Automotive Walnut Sand Carbon Cleaner utilizes high-pressure airflow to propel walnut sand into the engine intake pipe. Inside the enclosed intake pipe, the high-pressure and high-speed sand particles vigorously tumble and collide, effectively dislodging carbon deposits from the intake valve and cylinder wall. Subsequently, the walnut sand and carbon mixture impurities are collected and directed through a specialized connector into the sand storage barrel for recycling. This process ensures that the carbon mixture is efficiently returned to the sand storage barrel for further use.
What is walnut powder?
Walnut powder, also known as walnut sand, is produced by grinding crushed walnut shells into a fine powder after a rigorous selection process. It possesses remarkable anti-pressure and wear-resistant properties.
Walnut sand features a multitude of surface pores that grant it exceptional adsorption capabilities. It is non-toxic and corrosion-resistant, demonstrating resistance to dissolution in acids, alkalis, and water.
As a pure, natural polishing material, walnut sand boasts a hardness level that falls between that of metals and carbon deposits. This unique characteristic allows it to effectively and thoroughly clean the intake pipe and the back side of the intake valve without causing any damage.
Usage Steps:
STEP1:Open head cover of AUTOOL HTS558 and pour into walnut powder (need 2-4KG ), press dust guard on walnut powder then close cover.
STEP2:Join spary gun muzzle and recycle hose together (there is a hole on recycle hose).
STEP3:Remove intake manifold of engine, plug spary gun into intake, turn crankshaft to close intake valve. Connect air pump((not include)) to HTS558.
STEP4:Connect AC power, start clean. The process should last 1-3minutes(depending on carbon deposition). Normally, walnut powder can be reuse 5-10 times.
What is carbon deposition?
Carbon deposit is the black gel caused by the repeated high temperature of the engine running, which is the residual rubber in the fuel injector, the throttle valve, the spark plug, and other components caused by insufficient combustion of the gasoline in the cylinder.
Warm Noted:
The HTS558 fuel system cleaning tool is specifically designed for cleaning the intake pipe and the back side of the intake valve only. If you need to remove carbon deposits from the injector, throttle valve, or cylinder, please consider using the CT400, CT500, or C100. Please note that walnut powder is not included in the package, so youll need to obtain it from a local market. Additionally, youll need a high-pressure air pump, which is not included in the package. Any residual walnut powder in the intake pipe will turn to ashes at high temperatures once the engine is started.
Why need to clean carbon deposition?
Carbon buildup will reduce the air-fuel ratio, decrease engine power output, and lead to higher fuel consumption. These effects can be detrimental to the engines health. Typically, it is recommended to perform engine carbon cleaning after approximately 2 years of use or when youve driven around 4,000 miles (or 4W kilometers). You can easily spot carbon deposits by removing the throttle.
Package include:
1x Walnut Sand DE-Carbon Cleaner Machine
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector