![1](https://images-na.ssl-images-amazon.com/images/G/01/x-locale/common/grey-pixel.gif)
HOW TO USE?
- 1. Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
- 2. Disconnect the pipe that needs to be connected with detector.
- 3. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
- 4. In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.
CAUTIONS:
1. When you use this Autory Standard version Car Smoke Leak Detector for the first time, fill with 20ml oil . Please be careful NOT to beyond this range. 2. The testing liquid : both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it cant be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.