Model | M R 1 Pro |
Size (L x W x H) | 83 x 55 x 30mm |
MIDI Interface | Built in high speed optocoupler, 5 Pin interface, 16 channel MIDI interface with one input and one output for high performance processing |
MIDI LAN Interface | Standard Ethernet RTP MIDI interface |
Indicator Light | Network communication indicator, Network working indicator |
POWER Interface | Use DC interface for power supply, power supply voltage 5V~9VDC |
MIDI Compatibility | Compatible with all MIDI devices with MIDI standard interface |
Listener Mode | Support up to 5 RTP MIDI terminals connected at the same time |
Initiator Mode | Support up to 3 DOREMiDi RTP MIDI devices connected at the same time |
Power Consumption | About 0. 8 W, 80mA(@9VDC), 150 mA ( 5VDC) |
IP Address | By default, the IP address is automatically obtained, and the IP address is assigned through a router with DHCP function. It can also be set as a static IP address |
1.MIDI OUT: 5Pin MIDI interface, connect to the MIDI IN inter face of MIDI Device.
2.MIDI IN: 5Pin MIDI interface, connect to MIDI OUT interface of MIDI device
3.MIDI LAN: Ethernet interface, connect Ethernet equipment through network cable, such as
network router, network switch, etc.
4.DC IN 5V~9V: Product power supply port, power supply voltage 5~9VDC, use DC5.5*2.1 plug,
tip is positive and sleeve is negative
5.MODE: Mode switch button, Long press 3 seconds to switch initiator listener mode , Long press
for 10 seconds to restore factory settings (red and blue indicators flash alternately)
6.LED: Mode indicator, blue is listener mode, red is initiator mode , The red and blue indicators
flash alternately to restore factory settings