Description

• TMC2209 V3.0 Stepper Motor Driver can widely used in 3D printers and small CNC machines, lower heat;
• it also can replace A4988 DRV8825 LV8729 old stepper driver.
• Compared with TMC2100, the resistance of TMC220 output driver (RDSon) is slightly lower, which reduces power consumption
• The TMC22209 V3.0 driver has an improved stealthChop mode (stealthChop2), which works better at higher accelerations.

Product parameters:

1. Step/Dir interface with microstep interpolation (up to 256 microsteps)
2. Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
3. Hardware compatible with StepStick and Pololu A4988
4. Configuration via CFG pins or UART interface
5. Motor voltage: 5.5-28V
6. Logic voltage: 3.3-5V
7. RSense: 0.11 Ohm
8. stealthChop2 - for quiet operation and smooth motion
9. spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
10. oolStep - current control for energy savings
11. stallGuard 4 - sensorless motor load detection

Package Included:

TMC2209 V3.0 Stepper Motor Driver*5

Heat sink * 5

Screwdriver * 5