Feature
●【Product Parameters】 Input: 120V AC 60Hz 0.2A, Output: 18V 500mA. No more need to take your doorbell down to charge. No more interrupted operation when you’re away. Video doorbell power adapter can keep your device constantly powered.
●【Long Cable】 No need to rewire, ultra-long 26ft (8m) cable provides you more convenience. You dont need to worry about the distance between the socket and the doorbell, it can be perfectly connected to your doorbell.
●【Compatibility】Suitable for Zmodo smart greet wifi doorbell / Nest Hello doorbell.
●【Easy to Install】 Assemble along the wall from your outlet to the doorbell without the existing doorbell or wiring. Easy installation and be able to set up in minutes.
●【High Quality】Xwartre power adapter can help extend battery working time and reduce power consumption, and is made of high-quality materials, so you can use it with confidence.
Description
UL Approved and Safe to Use:
The 18 volt doorbell power adapter has been certified by UL to meet safety standards, safety and stability, you can use our products with confidence.
NO MORE UNDERPOWER DOORBELL !
With this adapter, you can avoid all the defects of a rechargeable battery.
Power Adapter for most doorbells.
Compatible with
- Wyze Doorbell Pro
- Blink Video Doorbell
- Arlo Video Doorbel
- Eufy Video Doorbell
- Simplesafe Video Doorbell
- Arlo Camera
|
|
|
|
|---|---|---|
Easy to installAssemble along the wall from your outlet to the doorbell without the existing doorbell or wiring. Easy installation and be able to set up in minutes. |
Long cableThe ultra-long cable is 26ft (8m), you dont have to worry about the distance between the outlet and the doorbell, which allows you to easily plug it into an electrical outlet inside or outside your house. |
Safe and fastQuickly solve the "low battery" problem, you can charge the battery without removing the doorbell, which means your doorbell can work for you at any time. |
How to install ?
- Loosen the Terminals behind the doorbell;
- Link 2 wire tips to the two terminal on the back of the doorbell;
- Switch on the 120V AC power, until the rim of the button flash white light;
- Starts to work when the Power voltage is good.
