Feature
●⊙Lightning rod: The main material of the product is stainless steel; anti-corrosion, beautiful appearance, safe and reliable; anti-side strike; solid structure, strong wind resistance; large flow capacity, strong anti-lightning impact ability
●⊙Applicable to a variety of scenarios: It can be used in home roofs, industrial oil tank gas stations, manufacturing, farms and large communication equipment, radar satellite antenna lightning protection, and protection of buildings from damage
●⊙The spherical single-pin lightning receptor is a non-inductive, low-impedance metal inner conductor down-conductor, which transmits the lightning current after the lightning connection to the ground, and prevents the protected antenna tower or building from side impact and damage. charged.
●⊙ Simple installation: simple installation, threaded combination installation, four-hole installation, easier installation, more stable and durable
●⊙Service concept: We will provide high-quality service, if you have any questions, we will reply you within 24 hours
[1M & 3.2 ft Two balls]
[1M & 3.2 ft A ball]
[1.5M & 4.9ft Three balls]
Description
1. Installation method:
After opening the package, place the lower part of the lightning rod on the reserved installation position, and use M8x 60 stainless steel bolts to
The parts are installed and tightened, and the welding connection can also be carried out as required.
2. Installation precautions:
It is necessary to ensure the reliable electrical connection between the lightning rod and the lead-down part;
The system is well grounded, and its grounding resistance should be less than 10 ohms;
The protected area should be calculated according to the rolling ball method specified in the Code for Design of Lightning Protection of Buildings.
Brief description of the installation method of lightning rod: (The installation method is slightly different due to the different construction site conditions)
When an independent lightning rod is used for protection, the lightning rod should be installed at the highest position in the middle of the roof as much as possible. If the lightning rod protects the surface
If the accumulation is not enough, multiple lightning rods should be used for protection. The lightning rod should be fixed vertically and firmly, and the allowable deviation of verticality is 3/1000.
The metal device protruding from the roof should be connected with a lightning rod. No less than 4 M10*100 expansion bolts for base flange
Firmly fix the roof concrete. It can also be pre-embedded according to the flange hole position, and the base flange is directly welded to the pre-embedded part.