Feature

●【Product introduction】：The INA226 is a current shunt and power monitor with an I2C- or SMBUS-compatible interface. The device monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value, conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts.
●【Compatible】：The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and 125°C and features up to 16 programmable addresses on the I2C-compatible interface.
●【Design compact】：Senses Bus Voltages From 0 V to 36 V; High-Side or Low-Side Sensing; Reports Current, Voltage, and Power.Configurable Averaging Options-16 Programmable Addresses; Operates from 2.7-V to 5.5-V Power Supply; 10-Pin, DGS (VSSOP) Package.
●【High performance】：High Accuracy:– 0.1% Gain Error (Max);– 10 μV Offset (Max)
●【Instructions】: For detailed instructions, please refer to the link:https:https://bit.ly/3z0dNyh

Description

Product Description
The INA226 is a current shunt and power monitor with an I2C- or SMBUS-compatible interface. Thedevice monitors both a shunt voltage drop and bussupply voltage. Programmable calibration value,conversion times, and averaging, combined with aninternal multiplier, enable direct readouts of current inamperes and power in watts.
The INA226 senses current on common-mode bus voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device operates from a single 2.7-V to 5.5-V supply, drawing a typical of 330μA of supply current. The device is specified over the operating temperature range between –40°C and125°C and features up to 16 programmable addresses on the I2C-compatible interface

Pin Description
VBS: bus voltage input
SDA/SCL: IIC bus data and clock signal lines
ALERT: Multi-function alarm output
A0/A1: IIC address line
IN+/IN-: non-inverting analog input, inverting analog input

Features
Senses Bus Voltages From 0 V to 36 V
1.High-Side or Low-Side Sensing
2.Reports Current, Voltage, and Power
3.High Accuracy:
4.0.1% Gain Error (Max)
5.10 μV Offset (Max)
6.Configurable Averaging Options
7.16 Programmable Addresses
8.Operates from 2.7-V to 5.5-V Power Supply
9.10-Pin, DGS (VSSOP) Package

Applications
Servers
Telecom Equipment
Computing
Power Management
Battery Chargers
Power Supplies
Test Equipme

Package includes:
1 x INA226 Voltage Current Module
1 x 10-pin Male and female DuPont cable