Feature

●▲90pcs Diamond Burrs - Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing; Work on glass, metal , stone, ceramic, wood, plastic
●▲Sold Storage Box - PC plastic box is sturdy, falling resistant and moistureproof, easy for carrying and hanging; All parts were in order and set was complete, well organized to prevent scattered and confused
●▲Different Sharp Bits Accessories - 30 Style different sharp router bit can reach More Carving, Great for all types of detail work.
●▲Wide Usage - 1/8" diameter shanks, compatible with most rotary tools; Ideal for home improvement, craft and whenever you need to polish, grind, drill, cut, engrave, and more,used with most rotary tools ,Able to engrave on a wide range of materials including: wood, ABS, acrylic, PVC, plastics, etc. Well-suited for detailed work, such as building and sanding dollhouse furniture, model trains, or miniature buildings,Highly recommended for jewer
●▲What You Will Get - ZFE 90-Piece rotary tool carving,engraving bits kit and our best service


Description

ZFEZFE

ZFE is a company which provides car parts tool, such as polishing pad and buffing machine.

ZFEZFE

22

33

Evenly distributed particles

ZFE tools have multiple layers of fine industrial diamond particles bonded to the tips which provides longer drill life.

Different Sharp Bits Accessories

30 Style different sharp router bit can reach More Carving, Great for all types of detail work.

High-quality materials

1/8" diameter shanks, compatible with most rotary tools. ZFE tools are excellent for drilling through materials up to 1/2" thick.

22

1212

1313

Hardness

Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing; Work on glass, metal , stone, ceramic, wood, plastic

Sold Storage Box

PC plastic box is sturdy, falling resistant and moisture-proof, easy for carrying and hanging; All parts were in order and set was complete, well organized to prevent scattered and confused

DO NOT RUN DRY

Wet drilling it. The diamond coating is very thin. dont take any pressure.

Start the hole at an angle.

move the drill around just enough to ream out the sides of the hole.

Instructions

S1S1

S2S2

S3S3

STEP 1

Press and hold the safety lock and unscrew the interface.

STEP 2

Put the diamond burrs into the interface.

STEP 3

After putting the grinding needle, tighten the connector. Exercise on waste materials when using for the first time.