[For Bradford White Water Heater]
[40-89 Gallon Tank]
[90-120 Gallons tank]
[10 to 39 gallon tank]
|
|
|
---|---|---|
FITS ON ELECTRIC, GAS, SOLAR, HYBRID, INDIRECT AND GEOTHERMAL WATER HEATERSCorro-Protec anodes fit in all water heater tank types (excluding tankless models which do not have an anode). When you choose a Corro-Protec powered anode rod, the capacity of your water heater is what really matters. Standard tanks are between 40 to 89 gallons and will require our 40-89 gallons model. Our anode rod can be installed in both new water heaters and existing ones. |
4 MODELS FOR RESIDENTIAL TANKS BETWEEN 10 AND 120 GALLONS & 1 MODEL FOR RV SUBURBANThe Corro-Protec powered anode rods fit several brands such as: American, A.O. Smith, Ariston, Bosch, Bradford White***, Buderus***, Giant, John Wood, Kenmore, GWS, State, Lochinvar, Reliance, Rheem, Richmond, Rinnai, RUUD, Stiebel Eltron, Whirlpool, U.S. Craftmaster, and more. *** We offer a specific model for Bradford White water heaters that often require fitting into the hot water outlet instead of the dedicated anode port. |
CORRO-PROTEC IS HIGHLY RECOMMENDED IF YOU HAVE A WATER SOFTENERCorro-Protec anodes are safe with any water sources (city and well water) and water treatment systems (water softener, filtration, reverse osmosis, etc.). Its worth knowing that water softeners can be very aggressive in causing corrosion because soft water is conducive, and thus prone to, corrosion. Additionally, they can promote the growth of Sulfur Reducing B (SRB), which is typically responsible for the rotten egg smell in hot water. The Corro-Protec powered anode rod will automatically adjust its current to provide optimum corrosion protection. |
Corro-Protec will remove the sulfur smell from well water and city water and is especially effective in hot water.
No matter what causes the sulfur odor in your hot water, the Corro-Protec powered anode rod offers a reliable and cost-effective solution for neutralizing it. Moreover, it is a time-efficient answer to your problem, as it requires no maintenance and does not involve the use of chemicals like hydrogen peroxide or bleach.
Once the system is operational, the energy projected by our powered anode rod will prevent these unpleasant smells for years to come! If the foul smell also originates from the cold water, it means that your water source is contaminated. In that case, Corro-Protec will help by reducing the odor in hot water but wont solve this issue in cold water.
Sulfur smell in hot water is a common issue around North America and affects both new and old water heaters. Rest assured, Corro-Protec is your trusted solution to effectively eliminate this persistent problem.
Our Corro-Protec anode combined with the electrical current will provide added corrosion protection and increase the lifespan of your hot water tank.
Our technology provides a layer of permanent corrosion protection on the internal solders and weak points of the tank.
This technology is recognized by corrosion specialists and has been laboratory tested. We believe that powered anode rods should be installed in all water heater tanks to increase their lifespan.
Replacing magnesium or aluminum anodes every year ensures a protection from corrosion; however, the use of material depleting returns to diminishing effectiveness over time.
Moreover, powered anode rod greatly reduces the amount of water heater parts in the landfill every year when corrosion takes over and damages the tanks. Postponing disposal is essential for promoting sustainable practices.
The formation of limescale can cause a variety of costly issues, including the rehabilitation of water pipes and heating installations, as well as considerable energy losses.
The Corro-Protec powered anode is then used to break apart calcium molecules found in the water, preventing further calcite formation and compromising the formation of limescale which is usually left behind by hard water when it evaporates (water with high mineral count).
Limescale water can have negative impacts on the scalp and causes brittle and dull hair.
Air in hot water lines is a common problem and can be caused by various factors.
Corrosion inside water heaters is one of the most common causes, as it produces hydrogen which builds up and is released when hot water is used. Corro-Protec powered anode rods prevent and stop the corrosion process inside the tank.
Factory-installed magnesium anodes may also produce some hydrogen; however, it usually has no impact on water pressure. Finally, turning off the water supply or performing maintenance work can also allow air to enter the system.
Stop corrosion and the bubbles all at once!
Sulfur smell in hot water
Corrosion in tank and water heater leaks
Sediment buildup and limescale
Air in hot water lines and cloudy water
Corro-Protec Powered Anode Rod (titanium) VS Sacrificial anodes (magnesium, zinc and/or aluminum)
The Corro-Protec anode uses a completely different technology than sacrificial anode.
This technology will last much longer and will offer better protection to your tank.
Corro-Protec powered anode rods are Smaller, More Durable (20 years) & Better than any sacrificial anode rods.
When a hot water tank is exposed to corrosive water, the sacrificial anode will transfer electrons to the inner side of the hot water tank to protect it. The anode will slowly deplete. After a year or so, there will be no more protection.
To protect your tank, replace the existing anode with a Corro-Protec Powered Anode Rod and connect the current rectifier. Our Corro-Protec combined with the electrical current will provide improved corrosion protection & increase the life of your water heater.
10 to 39 Gallons Tanks | 40 to 89 Gallons Tanks | 90 to 120 Gallons Tanks | Bradford White tanks | For RV (Suburban) | |
---|---|---|---|---|---|
Customer Reviews |
4.6 out of 5 stars
6,257
|
4.6 out of 5 stars
6,257
|
4.6 out of 5 stars
6,257
|
4.6 out of 5 stars
6,257
|
4.2 out of 5 stars
101
|
Price | $149.95$149.95 | $159.95$159.95 | $169.95$169.95 | $179.95$179.95 | $109.95$109.95 |
Fits ANY TANK & BRAND EXCEPT Bradford White, Hot Water Outlet, Buderus and RV Water Heaters | ✓ | ✓ | ✓ | ||
Fits BRADFORD WHITE Water Heaters & Hot Water Outlet | ✓ | ||||
Fits RV SUBURBAN Water Heaters | ✓ | ||||
Works with all WATER SOURCES (i.e.: well water, city water...) | ✓ | ✓ | ✓ | ✓ | ✓ |
Works with all WATER TREATMENT SYSTEMS (i.e.: water softener, reverse osmosis, filtration...) | ✓ | ✓ | ✓ | ✓ | ✓ |
Rectifier | 5 mA | 15 mA | 15 mA | 15 mA | 5 mA |
Anode Rod Size & Material | 12 inches Anode Made of Titanium and Mixed Metal Oxide (MMO) | 12 inches Anode Made of Titanium and Mixed Metal Oxide (MMO) | 19 inches Anode Made of Titanium and Mixed Metal Oxide (MMO) | 12 inches Anode Made of Titanium and Mixed Metal Oxide (MMO) | Thinner 10 inches Anode Made of Titanium & MMO (fits only RV tanks, not for residential water heaters) |
Tank capacity | 10 to 39 Gallon | 40 to 89 Gallon | 90 to 120 Gallon | 10 to 120 Gallon Bradford White tank | All RV Suburban water heater |
Quality promise | 20-Year | 20-Year | 20-Year | 20-Year | 20-Year |
|
|
|
---|---|---|
Powered anode rods prevent problems, not create new ones.Uncertain about the existing anodes location? Whether its in a dedicated port or integral to the pipe nipple in the hot water outlet, consult your digital or printed water heater owners manual for easy guidance. Dual anodes? One Corro-Protec powered anode is enough, so leave one of the existing anodes in place, and it wont cause any problems. Hard-to-remove anodes or stripped top nut? Our installation manual provides valuable tricks, including the use of a breaker bar and impact wrench. Consider our Bradford White anode model as your final solution, installable in the hot water outlet. Tight clearance? Cut the existing anode into pieces, use pliers to ensure that it doesnt fall into the tank, and install our 12-inch Corro-Protec powered anode rod. |
Maintenance made simple, enjoy peace of mind.Switch to durable solutions as the Corro-Protec powered anode rod and move away from temporary chemical treatments. Methods like chlorinating the inner shell, injecting hydrogen peroxide, or using a well sanitizer kit may address smelly water issues temporarily. However, these solutions provide only brief relief. Draining the water heater annually is recommended. But if you find yourself needing to drain it every month or so, its an utter waste of time and effort, especially when a permanent solution is available. Eliminate the sulfur smell by installing the Corro-Protec powered anode. Its designed not only to protect the inner shell from corrosion but also to prevent Sulfate-Reducing B (SRB) from thriving. This stops the chemical reactions that cause the sulfur smell, ensuring your hot water remains fresh and odor-free for years to come. |
Every small effort counts. Save money while helping the environment.First and foremost, installing the Corro-Protec powered anode in your water heater will help you save money on parts and tanks by extending the lifespan of your equipment and avoiding programmed obsolescence. Additionally, to save on energy costs, consider choosing an Energy Star unit paired with the powered anode to further safeguard your appliance. Delaying the disposal of your water heater is crucial for the environment, as it helps reduce unnecessary waste in landfills. Consider this: more than 8 million water heaters and parts are discarded every year. Imagine the environmental impact of cutting this number in half. Protecting the inner shell of your water heater with cathodic protection is the best long-term solution available. Corro-Protec offers its anode rod designed to last 20 years. Its a safe and easy way to reduce landfill waste! |