Feature(may vary by option.)

●Dual-Signal. Signal break-point continuous transmission. If one pixel is damaged, the following LEDs still work .WS2815 IC Built in 5050SMD.256 brightness display and 24-bit color display. One IC controls one LED .Every LED can be cut .Static effect, Chasing effect, special effect etc .256 brightness display and 24-bit color display.Pure Gold Wires better quality.Longer life, more stable quality.
●DC12V Individually addressable. DC5V WS2812 Upgrade, Comes with backup data. Maximum white brightness , 16.4ft no voltage drops.Ultra bright. 256 gray levels, 24 bits full-color display.Only support 12V power supply.Do not try DC5V DC24V power supply.Recommend power supply:DC12V10A(120W).
●High-LED Quality, it made by copper bracket and 10 pure gold wires. Wide compatibility. It works with CSY08, SP108E,SP105E,SP107E, K-1000C,Intelligent speech control etc .Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software.Power adapter and controller need to be purchased separately.
●Easy installation. IP67 has no double side tape on its back . It comes with screws and clips instead of the self-adhesive back tape. With 4-pin male connector and separated power/ground wires on both ends, which makes it easy to hook up each other and wire up for power.There is adhesive tape on IP30/IP65 LED strips back, so you can stick it to the wall or other items conveniently as you like.
●LED color change strip lights are widely used for anywhere you want, you can decorate your TV, diningroom, bedroom, cars, birthday party and any more, which can enrich your life and make your life colorful.1-year warranty, if you have any issues, please contact us without hesitation.

[White Pcb IP67 16.4ft 150LEDs]




[Black Pcb Ip65 16.4ft 150LEDs]




[Black Pcb Ip67 16.4ft 300LEDs]




[White Pcb IP67 16.4ft 300LEDs]




[White Pcb IP65 3.3ft 144LEDs]




[Black Pcb Ip65 16.4ft 300LEDs]




[White Pcb IP65 16.4ft 150LEDs]




[Black Pcb Ip30 16.4ft 150LEDs]




[Black Pcb Ip67 16.4ft 150LEDs]




[White Pcb Ip30 16.4ft 300LEDs]




[White Pcb Ip30 3.3ft 144LEDs]




[White Pcb IP67 3.3ft 144LEDs]




[Black Pcb Ip30 3.3ft 144LEDs]




[Black Pcb Ip67 3.3ft 144LEDs]




[Black Pcb Ip65 3.3ft 144LEDs]




[White Pcb IP65 16.4ft 300LEDs]




[Black Pcb Ip30 16.4ft 300LEDs]




[White Pcb Ip30 16.4ft 150LEDs]





Description

  • Light source: 5050 RGB LED
  • LED Qty: 60pcs per meter
  • Wave length (NM): R,650nm ; G,520nm ; B,460nm
  • Color order : G R B (NOT RGB)
  • The gray level: 256
  • Color: full color (24-bit )
  • View angle: 120°
  • Voltage: DC12V
  • LED Strip Width:LED Strip Width: IP30/ IP65 -10mm IP67 -12mm (Includes waterproof silicone sheath)
  • Power:0.1W~0.3W/LED Total :30W~90W (Not a fixed value)
  • Waterproof:IP30/IP65/IP67 .There is no double side tape on IP67.
  • Double side tape: IP30/IP65
  • Recommend Power Supply: 12V10A 120W
  • FPCB board color: Black/White
  • Dimension: Length x Widthx Height: P30:5000mmx10mmx2.13mm IP65:5000mmx10mmx3.0mm IP67:5000mmx12mmx3.85mm
  • Life span: ≥50000hrs
  • Light up 1 color(red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED

Note:

  • LED strip is made by 50cm FPCB, so there is a solder point each 50cm on strip. But this minor flaw has no any bad effect on the strips performance. In fact, ALL the LED strips on the market are manufactured in half-meter lengths.
  • The LEDs at the far end of the strip might be dimmer because of the added resistance and voltage drop that occurs during the current flows to that end of the strip. The solution is adding DC12V voltage every 16.4ft or 32ft according to the actual situation .
  • Using voltage DC12V ,higher than 12V will destroy it. Please dont use the DC5V or DC24V power supply to power it .
  • There is no double side tape on IP67.

11

Features:

  • Backup Data . Signal break-point continuous transmission. If one of the LED is damaged, the following LEDs still work well.
  • Maximum White Brightness Without Voltage Drop .The installation is more convenient. If the length is 32ft , please add voltage DC12V every 16ft.
  • DC12V RGB Individually Addressable . Every LED is programmable . WS2815 IC chip .When you use SP110E ,SP105E,SP107E,SP108E,K-1000C etc SP controller , you can select WS2811 IC chip for this LED strip.
  • High-quality LED . Pure gold wires , Copper stent, Ultar bright .

11

Every Pin Function

  • 12V: Power Voltage, connect to “+12V”
  • DO: Control data signal output
  • DI: Control data signal input
  • BO: Backup control data signal output
  • BI: Backup control data signal input
  • GND: Power Grounding
  • BI can connect to Controller Data or GND.

11

Waterproof Level

  1. IP30: Non-waterproof . Only work indoor .
  2. IP65: Silicone Coating Splash Proof .Dust prevention splash proofing designs. Only work indoor.
  3. IP67: Sheating Waterproof. Dust prevention water proofing designs. Can work outdoor but the 3 PIN connectors are non-waterproof.
  4. IP68:Glue-Pouring Waterproof.Dust prevention water proofing designs. Can work underwater.3 PIN waterproof connector. IP68 needs to be customized.
  5. If you want to install our LED strip on the eaves, we recommend you customize IP68.

11
11

Package:

  • 16.4ft WS2815 60LEDs/m LED strip
  • 1x4pin male connector
  • Power adapter or controller is not included


From the brand

Important information

To report an issue with this product or seller, click here.