Feature

●DMX512 signal amplification function and prolong the DMX signal transmission distance
●DMX512 signal distribution function, multi-level sharing after a DMX control system
●Separate inductors power cable, independent DMX signal ground, the standard DMX independent distribution amplifier
●Eight independent isolated output function, to avoid the system after the class DMX signal interference and sabotageOne input, eight independent DMX signal amplifier output


Description

6354363543
edfgsdfedfgsdf
aSASaSAS

  • RioRand 1 Input 8 Ouput DMX512 Signal Amplifier have unique and novel appearance, super compact signal amplifier,high stability,multi-functional and good quality.
  • Technical Parameters : Supply voltage: DC12V-24V
  • Operating temperature: -40~85℃
  • Input signal: one group DMX signal
  • Output signal: 8 groups DMX signal
  • 1000V optocoupler isolation, safer to use.
  • The amplifier is equipped with a 12V1A power supply
  • Static power consumption:< 1W Each channel can take 20 loads
  • External Size(L*W*H):198*93*47mm/7.8*3.66*1.85in
  • Package weight:450g
  • Functions: DMX signal amplifier can re-output DMX signal after receiving DMX signal, it is mainly used for prolonging the transmission distance of DMX signal and increasing the ability of driving DMX signal
  • Package Content:
  • 1 x DMX Signal Amplifier
  • 1 x Power Supply
  • 1 x Extra Power Cable
  • Attention:
  • 1.Do not connect two wires directly to avoid short circuit
  • 2.Lead wire should be connected correctly according to colors that connect drawing offers
  • Note:
  • Do not operate this product with power on. Do not connect the load after turning on the amplifier. The correct way to use it is to turn on the load first after connecting all the wires, and then power on the amplifier at last, because the load is powered on Some products will cause interference and damage the output chip of the amplifier at the moment of plugging and unplugging.
  • If you operate with power, turn on the amplifiers signal input and connect it, and then turn on the output light and then connect the signal to the amplifier. This will easily cause instantaneous reflux and burn the chip.
  • It is necessary to connect the line first, and then turn on the amplifier after the load is turned on, because the test found that there will be a backflow at the moment the load is turned on, which may burn the output chip of the amplifier. So be sure to turn on first. Re-open the amplifier for the load.

sdfqwdfswsdfqwdfsw

Features

The new generation optocoupler isolated DMX signal amplifier power supply is separated into two ways by rectifier bridge, the isolation voltage of the two power supplies is 1000V, the signal part is separated by imported 10M high-speed optocoupler, the isolation voltage between the input signal and output signal is as high as 2500V, even if the output part receives high voltage, it will not affect the normal use of the input signal, effectively preventing lightning strikes and anti-interference. The signal output part has a current limiting resistor to prevent signal connection short circuit.

Product information