Feature(may vary by option.)
●Easy to Pair: Simply press the test/silence button to pair with your Link+ wireless interconnected smoke alarms or carbon monoxide detectors
●Quickly Locate the Source Alarm: Simply press the test/silence button on the remote controller, and all interlinked smoke alarms but the alarm that detected the smoke will be silenced, so you can locate the fire hazard; press it again to silence the source alarm
●Convenient Remote Control: The X-Sense remote controller allows you to easily test all interconnected smoke alarms and mute any false alarms without the need to climb and reach to press a test button; especially convenient for the elderly
●Replaceable Battery: The lithium battery can support 1-year continuous use and can be easily replaced by yourself
●Worry-Free After-Sales Services: Comes with a 60-day money-back guarantee, 2-year warranty, and lifetime customer support with a response time of 24 hours
[1-Pack]
Description
|
|
|
|
|
|---|---|---|---|
Pair the Remote Controller with the X-Sense Alarm1. Press the test/silence button on one of the interlinked detector group 4 times. The unit will beep once, and the red LED will flash slowly, indicating it is waiting for a new unit to be added. 2. Press the test/silence button on the remote controller twice. The LED will flash rapidly, indicating it is searching for a device to connect to. 3. After successful linking, the alarm will beep once and automatically exit the paring mode. |
Test the Wireless Connection Between Alarms1. Hold the test button while within wireless range. The LED indicator on the remote controller will flash. 2. After the alarms have received a signal (takes about 7 seconds), their LED indicators will flash and the alarms will sound continuously. 3. Release the test button. The LED indicator on the remote controller will stop flashing, indicating that the testing has ended. |
Silence the AlarmsSimply press the test button to silence the alarms when non-emergency smoke (e.g. steam) causes nuisance alarms. During an alarm state, press the test button once and all the interlinked alarms but the initiating alarm will be silenced. Press again to silence the initiating alarm. The LED indicator on the remote controller will blink blue with each press. |
Test the Remote Controller’s Power StatusIn standby mode (non-alarming state), when you press the test button, the LED indicator on the remote controller will blink blue, indicating a normal power supply. |
Battery Installation:
1. Pry open the rear cover by inserting the included key into the slot at the bottom of the remote controller’s backside.
2. Peel off the insulating film on the button cell. Ensure the correct polarity of the battery and close the cover.
Package Contents:
1 × Remote Controller (Battery Included)
1 × Adhesive Tape
1 × Key
2 × Screws
2 × Anchor Plugs
1 × Manual
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MODEL RC01 | MODEL SC07-W | MODEL XP01-W | MODEL XS01-WR | MODEL SD19-W | MODEL XC01-WR | |
|
|
||||||
| Customer Reviews |
602
|
— |
604
|
4,780
|
591
|
4,600
|
| Price | $18.99 | — | $239.99 | $149.99 | $99.98 | $35.99 |
| Sensor Type | Photoelectric & Electrochemical | Photoelectric & Electrochemical | Photoelectric | Photoelectric | Electrochemical | |
| Detection Type | Smoke & Carbon Monoxide | Smoke & Carbon Monoxide | Smoke | Smoke | Carbon Monoxide | |
| Interconnection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Compatible with RC01 | ✓ | ✓ | ✓ | ✓ | ✓ | |
| Item Size | 1.57 x 3 x 0.47 in | Ø 5.7 x 2 in | Ø 5.3 x 1.7 in | Ø 3 x 1.9 in | Ø 4.8 x 1.8 in | 5.3 x 2.5 x 0.6 in |