Feature

●Receiver: The receiver has a built in induction coil for receiving the magnetic signal from the pipe, and the transmitter head is loaded by the microcontroller and transmits the signal of a specific frequency.
●Transmitter: The transmitter has two receiving modes: far (note: about 5 meters) and near (note: about 1 meter). Adjust the sensitivity knob, peak mode (max) or zero mode (min) to position the transmitter.
●Accurate Positioning: The 512hz locator locates problem locations faster, effectively solving the arduous task of inspecting sewer pipes, gutters, and narrow underground environments.
●Long Service Life: Built in polymer lithium battery, 3000mAh (receiver), LR44/160mAh (transmitter), charging time is 6 hours, battery working time is about 10 hours. 3 level battery indicator light.
●Pipe Inspection: Used for water supply pipelines, air conditioning pipelines, cable pipelines, industry pipelines, underground pipeline construction, underground cave exploration, underwater research, etc.


Description

Sewer Camera LocatorSewer Camera Locator

Pipe Inspection Camera Locator

  • Sewer Camera Locator that based on the 512hz locator, which help pinpoint the problematic location pace quickly, perfectly & effectively solves the hard work of inspecting ewer lines, drains, wells, chimney, machinery, water tanks, railway, general building and any underground narrow environment.

Package List:

1 x Camera Receiver

1 x Usb Cable

1 x Charging Head

1 x Manual

1 x Transmitter

Pipe Inspection Camera LocatorPipe Inspection Camera Locator

512Hz Receiver Specification

Material PVC
Receiver Frequency 512HZ
Power Consumption <3W
Distance About 5 meters
Polymer Lithium Battery 3000mAh (receiver), LR44/160mAh (transmitter)
Charging Time About 6 hours
Battery Indicator 3 gears, flashes when the battery is low
Battery Working Time About 10 hours
Signal Strength 6 levels
Speaker Support
Detection Mode Far/Near
Voltage 100-240V

Feature

Sewer Camera ReceiverSewer Camera Receiver

Pipe Inspection Camera ReceiverPipe Inspection Camera Receiver

Drain Plumbing Inspection Camera ReceiverDrain Plumbing Inspection Camera Receiver

Sewer Pipe Detection DeviceSewer Pipe Detection Device

Receiver

The receiver has a built in induction coil for receiving the magnetic signal from the pipe, and the transmitter head is loaded by the microcontroller and transmits the signal of a specific frequency.

Transmitter

The transmitter has two receiving modes: far (note: about 5 meters) and near (note: about 1 meter). Adjust the sensitivity knob, peak mode (max) or zero mode (min) to position the transmitter.

Long Service Life

Built in polymer lithium battery, 3000mAh (receiver), LR44/160mAh (transmitter), charging time is 6 hours, battery working time is about 10 hours. 3 level battery indicator light.

Accurate Positioning

The 512hz locator locates problem locations faster, effectively solving the arduous task of inspecting sewer pipes, gutters, and narrow underground environments.

Sewer Camera with Locator and ReceiverSewer Camera with Locator and Receiver

Scope of Application

The camera receiver is used for water supply pipelines, air conditioning pipelines, cable pipelines, lead industry pipelines, underground pipeline construction, underground cave exploration, underwater research, etc.