Feature

●The turbidity sensor module converts the current output by the sensor into a voltage , and performs AD conversion data processing through the singlechip microcomputer.
●The turbidity sensor module is widely used and can be used in industrial field control, environmental sewage collection and other occasions that require turbidity detection and control.
●The turbidity sensor module can determine whether the turbidity of the water exceeds the standard to give an early warning or link with other equipment.
●Easy to use and high measurement accuracy, can be used to measure the degree of water pollution of washing machines, dishwashers and other products.
●Small size, easy to carry and store, convenient to use and with good performance.

Description

Specification:
Item Type: Turbidity Sensor Module
Material: Synthetic cardboard
Working Voltage: 5.00V DC
Working Current: 40MA (maximum)
Response Time: <500MS
Insulation Resistance: 100MΩ (minimum)
Output Mode: Digital output
Analog Output: 0~4.5V
Digital Output: High/low level (you can select the corresponding national value by adjusting the potentiometer)
Operating Temperature: -20~90
Sensor Interface: XH2.54

Package List:
1 x Module 1 x Sensor Connector 1 x Cable

Note:
1. The top of the turbidity sensor is not waterproof. It is forbidden to throw the turbidity sensor completely into the water during use. The water surface cannot pass the connection between the top cover and the shell. Water in the sensor will cause the sensor to burn out.
2. The wavelength range of light received by the photodiode of the sensor is (500~1050NM). The wavelength of sunlight or fluorescent light will affect the reception of the photoresistor of the sensor and affect the measurement output. Direct sunlight or light will increase the measurement error of the sensor. Avoid direct sunlight or light when using the sensor
3. The sensor head housing should be kept cleaning to avoid inaccurate measurement caused by contamination.