●One-Cord Channel Mini Cord Hider: A good choice when you only have one cord about 0.23" (5.8 mm) in diameter to hide. Mini cord cover wall contains 10 channels, each cable raceway is 14.2" L x 0.48" W x 0.3" H. Ideally suited for covering one cable such as lamp cable, monitor cable, speaker cable, Cat-5 or Cat-6 Ethernet cable ●Total Length 142" Wire Hider Covers for Cords: Cable hider contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion. You can follow the instructions for flexibility in securing cable cover and one cord where needed, rather than damaging your wall with screws (not suitable for textured walls) ●Finished Installation with Connector-Free Design in Minutes: For easy installation, the Delamu cord covers for wires on wall have no connectors. Even without experience, installation is a breeze. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover ●Hide The Unsightly Cable: This paintable and cuttable wall cord cable concealer has an extremely slender appearance and a round arc angle profile that subtly matches the wall. Without messy cords, there is more room in your home and office for you to move around ●Household Security First: Exposed and unsightly cords may trip up your family. Babies or pets chewing and playing with cables are more likely to cause danger. Install Delamu cord cable management kit to organize unsightly cables and prevent unpredictable accidents ●Passing the UL94 V-0 Rating Test: A plastics flammability standard released by Underwriters Laboratories of the United States, UL94 V-0 Rating is defined as Burning stops within 10 seconds on a vertical part allowing for drops of plastic that are not inflames, which means its safer than ordinary materials because of the higher flame retardancy and brings greater security to your daily use ●Warm Reminder: CC05 One-Cord Hider is design for a MINI SINGLE Standard-size Cord while maintaining as low of a profile as possible. If you want to hide multiple cables (or larger one cables), you may get larger cord cover raceway kits from Delamus other cable hiders; 10Pcs x14.2in cord hiders set (not a 142in long raceway)
[White]
[Beige]
Description
L14.2in W0.48in H0.30in ,total 142 in
MINI One-Cord Cord Hider CC05
Mini Premium Cord Cover Wall: This is a good choice when you only have 1 cable about 0.23 inches (5.8 mm) in diameter to organize and hide
Concealable Common Cords: Speaker/Lamp/Phone/Fax Cables, Ethernet Cords, home and office wires, etc
Passing the UL94 V-0 Rating Test
A plastics flammability standard released by Underwriters Laboratories of the United States, which means its safer than ordinary materials because of the higher flame retardancy and brings greater security to daily use
Discover Genuine Customer Reviews with Real-life Photos - Hear from Our Buyers
Perfectly Fit and Concealed the Cords
Easy instal, paintable, and concealed cords
Works Great!
I’ve used these in several locations and recommend them
Excellent!
Truly the perfect cord cover
Didnt even take 2 minutes to install
Very Nice!
Very Easy to put up and make level. The beige color nearly matches with my wall perfectly too! am so very pleased with it. Used it on 3 tvs
Perfectly!
East to install
AMAZING!!
So simple to use, perfectly for what I needed. Covers small cords perfectly. White matches everything. Don’t hesitate, buy them
Invisible & Aesthetic
This one-cord cord hider wall provides the most suitable cable raceway for a home or office that only needs to hide a wire and they are not visible.
Paintable & Cuttable
The paintable and cuttable wire hider covers for cords has an extremely slender appearance and a round arc angle profile that subtly matches the wall.
Paintable to Match Your Wall
Cable hider is paintable, you can paint any color to match your wall. With a coat of latex-based paint, they’ll just disappear into the background.
10 Pre-cut Adhesive Foam Tapes
The cable cover contains 10 channels and 10 pre-cut adhesive foam tapes. The attached tape has been upgraded to higher quality and stronger adhesion.
For easy installation, this Delamu Cord Hiders have no connectors. Just peel and stick the double-sided tape to the back of the channel, press it to the wall, put one cord in, and close the cover.
Delamu, your wire expert, designed this one cord Wall Cord Concealer to provide the most suitable Cord Hider for a home or office that only needs to hide a single wire.
This is the optimum choice when you have one cable to hide. Designed to enclose a low-voltage cable such as speaker cable, lamp cord. Without messy cords, there is more room for you to move around.
Pay the same but get more raceways and elbows. In this set, you’ll get 15x Cable Hider Channels(16.9in Each), 14x couplings, 6x flat elbows, 2x inside elbows, 2x outside elbows, and 2x tapes.
In addition to its function of concealing cables, this grey single Cable Concealer, Wall Cord Hider Improve the look of your home. Its slim and modern design complements your any decor and furniture.
The Delamu Cable Raceway CC05 can hold up to a single cable about 0.23 inches (5.8 mm) in diameter. Reference: A regular pencil about 0.23 inches (5.8 mm) in diameter.
What is the size?
The wall cord hider kit is made up of 10 raceways. The size of the single raceway is L14.2" x W0.48" x H0.30" , for a total length of about 142 inches. (Please note that it is Not 142 inches long for a single channel).
Does the tape stick?
The tape is very sticky. Youd better plan the route before mounting the raceway to prevent re-installation and wall damage. However, some customers feedback that tape is not sticky, we recommend you wipe the dust on the wall before installation.
How to remove from the wall?
Our tape is very sticky. If you have to remove the tape, please peel it off slowly (or use a knife to gently assist in removing the tape).
Can I use on textured walls?
This wire hider covers for cords can be used on smooth walls, but not on textured walls.