It is a tee fitting with three openings for connecting.
This T adapter is G1/2" outlet and inlet designed to fit G1/2" angle valve, shower hose and shower arm.
Material: Stainless Steel
Finish: Brushed Nickel
Installation Method: Screw in
Connection Size:G1/2, Straight Threads
1/2" all 3 sides. This fits 1/2" water shutoff so you can T-off from 1/2" shutoff to 1/2" hose going to bidet sprayer.
You still need separate braided toilet hose that is 1/2" one side and larger 7/8" that goes on toilet tank underside.
G1/2" (OD 20.54mm) Male Thread
G1/2" (OD 20.27mm) Male Thread
G1/2" (ID 19.3mm) Female thread
1 x Stainless Steel T Valve
3 x Rubber Washers
|
|
|
---|---|---|
Strong stainless steel construction, made in one piece, ensuring quality and longevity. |
Screwing on the female inlet without turning the entire valve around when outlet is close to a wall. |
Rubber gaskets included for a better tight seal, fits well with your fixtures without leaking if install properly. |
G 1/2 Male to US 3/8 Female Thread Adapter | G 1/2 Female to 1/2 NPT Male Thread Adapter | |
---|---|---|
If you have smaller 3/8" coming off wall shut-off valve, then you can buy a reducer that goes from this 1/2" side to 3/8". | If your fittings is tapered thread, you can buy a G 1/2 to 1/2 NPT thread adapter to match. |