Feature
●COMBINATIONS: our grommet tool kit contains 1pcs eyelets pliers, 1pcs leather hole punch, and 200pcs gold and 300pcs silver 1/4 inch Eyelets (Note: This product does not need to use gaskets)
●DIMENSIONS: the eyelets inside diameter is 1/4 (6mm), outside diameter is 1/2 (12mm), barrel height is 1/4 (6mm) and the length of eyelets plier is 6.25 (16cm) and the length of leather hole punch is 3.3 (8.4cm)
●CONVENIENT USE: (1) Use the leather punch to punch a small hole in the fabric with a hammer (2) Put the eyelet into the hole (3) Press the eyelet pliers according to the correct direction of the product picture
●WIDE APPLICATION: our grommets kit does not need to use washers, the design of the eyelet pliers is labor-saving and efficient, and can be used in a variety of scenarios, such as leather, belts, clothes, fabrics etc.
Description
-
Step1:
With a hammer of more than one pound, hammer the punch which on the top of the fabric.
-
Step2:
Place the eyelet in the hole (there is no need to use the washer in our set).
-
Step3:
Align the pliers bulge with the gas eye depression.
-
Step4:
Using both hands, press the pliers firmly until you feel the eyelet sink.
-
Step5:
Here shows the front and back side of the eyelet after successful compression.
USE INSTRUCTIONS
PRODUCT FEATURES:
Labor-saving eyelet pliers:
The eyelet pliers replace the traditional 2-piece grommets press tool, which is light and labor-saving.
Flowering eyelet (without washer):
There are small cracks at the bottom of the eyelet, which is our new design to facilitate the pressing of the eyelet.
WIDE APPLICATION:
our grommets kit does not need to use washers, the design of the eyelet pliers is labor-saving and efficient, and can be used in a variety of scenarios, such as leather, belts, clothes, fabrics etc.
