Feature

●💥 𝐌𝐞𝐭𝐚𝐥 𝐌𝐚𝐫𝐤𝐢𝐧𝐠 𝐏𝐨𝐰𝐝𝐞𝐫: Introducing Brilliance Laser Inks game-changer product for laser marking & engraving. Our innovative formula allows you to create striking, long-lasting 𝐛𝐥𝐚𝐜𝐤 designs on a wide range of metals. With compatibility 𝐂𝐎𝟐 (𝟐𝟓 𝐖𝐚𝐭𝐭 𝐦𝐢𝐧𝐢𝐦𝐮𝐦), 𝐅𝐈𝐁𝐄𝐑/𝐘𝐀𝐆 (𝟏𝟎 𝐖𝐚𝐭𝐭), and 𝐃𝐈𝐎𝐃𝐄 (𝟏𝟎 𝐖𝐚𝐭𝐭) 𝐥𝐚𝐬𝐞𝐫𝐬, weve got you covered. Experience the power of Brilliance Laser Inks and take your printing to the next level
●🛠️ 𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐌𝐞𝐭𝐚𝐥 𝐌𝐚𝐫𝐤𝐢𝐧𝐠: Discover the versatility of our product which is compatible with 𝐀𝐥𝐮𝐦𝐢𝐧𝐮𝐦, 𝐒𝐭𝐚𝐢𝐧𝐥𝐞𝐬𝐬 𝐒𝐭𝐞𝐞𝐥, 𝐁𝐫𝐚𝐬𝐬, 𝐂𝐨𝐩𝐩𝐞𝐫, 𝐏𝐞𝐰𝐭𝐞𝐫 and many more. Disclaimer: results may vary depending on different metal grades, laser types and laser settings.
●🚀 𝐈𝐧𝐭𝐫𝐨𝐝𝐮𝐜𝐢𝐧𝐠 𝐑𝐞𝐯𝐨𝐥𝐮𝐭𝐢𝐨𝐧𝐚𝐫𝐲 𝐓𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲: The container offers a conveniently pre-measured quantity for your convenience. Using a measured spoon, transfer the powder onto a clean surface. Next, 𝐚𝐝𝐝 𝐝𝐞𝐧𝐚𝐭𝐮𝐫𝐞𝐝 𝐚𝐥𝐜𝐨𝐡𝐨𝐥 or a similar substance to the powder. The standard 𝐦𝐢𝐱𝐢𝐧𝐠 𝐫𝐚𝐭𝐢𝐨 𝐢𝐬 𝟏:𝟏. Ensure thorough mixing of the powder with alcohol by using the 𝐢𝐧𝐜𝐥𝐮𝐝𝐞𝐝 𝐟𝐨𝐚𝐦 𝐛𝐫𝐮𝐬𝐡. Experience the convenience and effectiveness of our revolutionary technology today
●⚡ 𝐅𝐚𝐬𝐭 𝐃𝐫𝐲𝐢𝐧𝐠: The rapid-drying feature ensures complete drying within 𝐣𝐮𝐬𝐭 𝐚 𝐟𝐞𝐰 𝐦𝐢𝐧𝐮𝐭𝐞𝐬. For even faster results, use a heat gun or hair dryer to dry within seconds. Rest assured, our product will not blister up with high heat like others
●🧹 𝐄𝐚𝐬𝐲 𝐂𝐥𝐞𝐚𝐧 𝐔𝐩: Introducing the industrys most innovative and easy-to-use product for removing excess laser marking on metals. Simply 𝐫𝐢𝐧𝐬𝐞 or 𝐰𝐢𝐩𝐞 away the markings to reveal a durable and intricate design with fine lines
●📞 𝐅𝐫𝐞𝐞 𝐓𝐞𝐜𝐡 𝐒𝐮𝐩𝐩𝐨𝐫𝐭: Get lifetime technical support for free with our 𝐔𝐒𝐀 𝐭𝐨𝐥𝐥-𝐟𝐫𝐞𝐞 𝐧𝐮𝐦𝐛𝐞𝐫. Whether you prefer chatting or emailing, well make sure youre satisfied with our product and customer service
●😃 𝐒𝐚𝐭𝐢𝐬𝐟𝐚𝐜𝐭𝐢𝐨𝐧 𝐆𝐮𝐚𝐫𝐚𝐧𝐭𝐞𝐞: Get 100% satisfaction through our 𝐬𝐡𝐢𝐩𝐩𝐢𝐧𝐠, 𝐫𝐞𝐭𝐮𝐫𝐧, and 𝐫𝐞𝐟𝐮𝐧𝐝 policy. If you have any issues with our laser marking products, please reach out to us and we will be happy to assist you


Description

Powder Photo HeroPowder Photo Hero

Product Key Features

PermanentPermanent

High contrastHigh contrast

Heat resistantHeat resistant

DurableDurable

Why Brilliance Laser Inks?

PowderPowder
  • Easy to apply. Easy to wash off.
  • Anti-Clog Technology (designed for spray system)
  • Permanent Mark
  • Quick dry
  • Works on various metals
  • Up to 40,000 square inch of coverage
  • Perfectly compatible with CO2 and Fiber Laser Nd:YAG Laser Systems

Laser marking made easy with Powders (in 50g, 250g, 500g, & 1kg)

Exceptionally adaptable laser marking inks to create high quality permanent mark on a various metal surfaces.

Get to explore our powder products that fit your needs. From personal projects to bulk production, weve got you covered! You can stock up on laser marking inks and buy from 50 g up to 1000 g of powder.

Note that this product does not include any alcohol in the package. Below application tutorial is for instructional purposes only.

How To Apply Powders

Powder-1Powder-1

Powder-2Powder-2

Aerosol-Step3Aerosol-Step3

Aerosol-Step4Aerosol-Step4

Step 1

Clean the substrate with denatured alcohol so its free of any dirt and oil. Weigh and mix denatured alcohol to the desired amount of powder to create a solution in a separate container.

Suggested powder to alcohol mixture:

Brush Application: 1:1 ratio by weight (e.g. 5g of powder to 5g of alcohol)

Spray Application: 1:2 ratio by weight (e.g. 5g of powder to 10g of alcohol)

*Double the coverage with spray application!

Step 2

Brush Application: Every purchase of our liquid ready comes with one (1) foam brush applicator. Apply even coats with foam brush as long as you do not see the substrate through the coat.

Spray gun, air knife or preval application: Use a spray gun or air knife, or screw on a preval spray system to the bottle and spray evenly just like an aeresol spray.

Allow the solution to dry fully or use a hair dryer or heat gun to dry it in seconds.

Step 3

Adjust your laser settings and focus the beam on the substrate then make your mark!

For guidance, refer to the table below for suggested starting parameters for your laser and substrate. For optimal results, you may need to adjust the parameters for your specific laser.

Step 4

You may instantly wash off the excess ink with water or a damp cloth. There is no waiting time needed!

Voila! You now have a permanent mark on your finished product.

Co2 and Fiber Laser SettingsCo2 and Fiber Laser Settings
1 2 3 4
Brilliance Laser Inks Brown Liquid Ready Brilliance Laser Inks Powder (50 g) Brilliance Laser Inks Powder (250 g) Brilliance Laser Inks Powder (500 g)
Brush Coverage (approx.) 500 sq. in. 1,000 sq. in. 5,000 sq. in. 10,000 sq. in.
Spray Coverage (approx.) 1,000 sq. in. 2,000 sq. in. 10,000 sq. in. 20,000 sq. in.
Colors Black, Red (Copper) Black Black Black
Preval Ready

Looking for specific info?

Product information