Feature(may vary by option.)
●Compatibility：Compatibile with 2016-2022 Chevy Camaro SS.
●Keep engine clean： The baffle system in the tank could Catch the oil and moisture from PCV/CCV air, prevent misfires due to carbon accumulation, Keep engine clean and prolongs engine life.
●Easy Installation： Single can mounts in line with the PCV system to separate oil from air using a 50 micron bronze filter.
●Premium Material： Make with High Quality 100% Billet, 6061 Aluminum, Anodized Surface, high temperature resistance and corrosion resistant for optimal durability and longevity. Sealed with Viton O-rings.
●Capacity：Catch can has a 3 oz. capacity for longer servicing intervals、Small but easy to clean.
[black]
Description
|
|
|
|
|---|---|---|
|
The baffle system in the tank could Catch the oil and moisture from PCV/CCV air, prevent misfires due to carbon accumulation, Keep engine clean and prolongs engine life. |
Make with High Quality 100% Billet, 6061 Aluminum, Anodized Surface, high temperature resistance and corrosion resistant for optimal durability and longevity |
The maxed Capacity of the tank is 5 oz （about 150ml), small but easy to clean |
|
|
|
|
|
|---|---|---|---|
Direct-FitEngineered to be a direct-fit, this baffled oil catch can works in conjunction with your stock air/oil separator for maximum protection. |
Quick DisconnectRubber hoses include pre-attached stock-style, quick-disconnect fittings for a true plug-and-play install. |
Hardware IncludedOIL CATCH CAN for CAMARO SS includes all the fittings, clamps and brackets,screws that you need for a quick and easy install. |
Application Specific BracketRobust, application-specific bracket mounts the can in a serviceable location away from most intake and supercharger kits. |
INSTALLATION STEP
1. Unclip the two tabs on the engine cover to remove the fuel line.Remove the black “Camaro”covers from your engine bay.Unscrew and remove the 4 posts that secure the central engine cover to your Camaro.（4*10mm nuts）
2. Disconnect the sensor located on the driver-side of the central engine cover.Unclip the tree-clips that attach the wire harness to the engine cover（8*tree-clips）
3.Remove the PCV hose from engine（Flathead Screwdriver）.Install the fittings and bracket onto the catch can.Loosen the bolt that secures the strut tower brace to the firewall of the vehicle.（1*10mm bolt）
4.Completely remove the two bolts which attach the strut Tower brace to the strut Tower on the driver-side（2*13mm bolts）.Install the catch can and reinstall the bolts removed previously..Tighten down the bolt that secures that strut tower brace to the firewall of the vehicle.（1*10mm bolt）
5.Install the hose with 45-degree bend onto the “in port”on the catch can.Install the hose with the 90-degree bend onto the“out port”on the catch can and tight the hose clamp.
6.Reinstall the engine cover and harness.