Feature
●【 Heavy drawer slide capacity 150lb】 All three sections of rails are made of 1.5mm thick Q235 thick steel plate, high-strength, high-density high-quality cold-rolled steel. It can support heavy load storage without deformation, After testing, the number of opening and closing times has reached more than 150,000 times.
●【Anti-rust & Smooth work 】The anti-rust ability and oxidation resistance of our slides is superior to the others because of the special galvanized blue sealing surface treatment; With dual industrial grade bearing ball inside,the drawers slide smoothly even though carrying heavy items; With a rubber crash pad on,which is a wear-resisting and impact-resistant device,the drawers slide quietly
●【3-fold full extension】 Slides width:2"(50mm)- length: 12" (300mm)--Fully extended length: 24"(600mm), “The 3-fold full extension”enable the slides to fully extend, so the drawer can be pulled out completely, which allows for the entire drawers storage to be accessed easily; Application range:Goods shelf, Cabinets, Industry-used drawer, RV, Truck, Vending machine, etc.
●【Installation requirements】 Dimensions: 11.81"（300mm）,full extension length: 24.02"（610mm）, installation clearance: left: 0.50" (13mm), right: 0.50" (13mm). . You can choose the size of the rails according to the depth of the drawer. The length of the rail should be less than or equal to the drawer. Please refer to the image above.
●【Notes for slide rails】 Due to different usage scenarios, this product does not contain screws. You can buy M4 screws yourself. When installing, please push the inner ball bearing to the top of the slide rail first, then connect it with the slide rail, and finally the installation is completed.
[with lock 32 Inch]
[without lock 22 Inch]
Description
Installation instructions
|
|
|
|
|
|---|---|---|---|
Step 11:Press the release button and pull out the inner rail (the outer rail the middle rail are inseparable) 2:After the tracks are separated,go to the next step of the installation guide |
Step 2Make sure the slides are leveled during the installation process |
Step 3place the base slides stay with the front edge of cabinet |
Step 4Mount the screws in the permanent mounting holes Adjust the inner member.Mount the screws in permanent mounting holes |
