Feature
●【High-speed Steel】Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Heat resistance and long service life.
●【Hand Reamer】Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
●【Straight Flute Tool】Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts.
●【Uncoated Design】Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
●【Wide Application】Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc.
[23-26mm]
[17-19mm]
[11.75-12.75mm]
[13.75-15.25mm]
[19-21mm]
[12.75-13.75mm]
[21-23mm]
[10-10.75mm]
[10.75-11.75mm]
[15.25-17mm]
Description
Utoolmart Chucking Reamer Lathe Machine Reamer Round Shank Milling Cutting Tool for Metal Non-Ferrous Metal Copper
- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications
- Can be used with a wide variety of tool holding systems. Reamers are used for light cut, repair work, removing stock or simply for enlarging holes
- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts
|
|
|
|
|---|---|---|
|
High-speed steel tool is good for general purpose applications, offering combination of hardness and toughness for wear resistance. |
Hand Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes. |
Straight flute tool allows chips to collect in the flutes when cutting and is well suited for most applications in shallow cuts. Heat resistance, long service life. |
Feature
Uncoated tool features just the base substrate without any additional treatment or coatings, and is suitable for wide ranges of applications.
Technical Parameters
It is designed for accurate reaming in A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials.
Tips:
Reamers can be used to process holes in small cuts based on guiding function, such as: holes with diameter tolerance in ≤IT8; holes with requirements in surface roughness (≤Rz12 genrally); holes with requirements in roundness tolerance; holes with requirements in cylindricity; stepped holes (different diameter holes on the same axis); series holes (diameter holes on the same axis) with requirements in high coaxality.
|
|
|
|
|
|---|---|---|---|---|
| 4mm | 5mm | 6mm | 7mm | |
| Cutting Diameter | 4mm / 0.16 inch | 5mm / 0.2-inch | 6mm / 0.24-inch | 7mm / 0.28-inch |
| Cutting Length | 18mm / 0.71-inch | 23mm / 0.71-inch | 26mm / 1.02-inch | 31mm / 1.22-inch |
| Shank Length | 22mm / 0.87-inch | 34mm / 1.34-inch | 36mm / 1.42-inch | 40mm / 1.57-inch |
| Total Length | 73mm / 2.87-inch | 83mm / 3.27-inch | 92mm / 3.62-inch | 103mm / 4.06-inch |
| Material | HSS(high-speed steel) | HSS(high-speed steel) | HSS(high-speed steel) | HSS(high-speed steel) |