Feature
●[WATER HEATER FLUSHER & ANODE ROD] You will receive 1 RV water heater tank flusher, 2 anode rods, 1 foam bottle and 1 Teflon tape. The scale condensed on the heat pipe will become thicker and thicker, affecting the heating speed and power consumption. The flusher quickly removes lime deposits from the bottom of the water heater. And regular annual replacement of the anode rod can reduce the corrosion in the tank and extend the life of the water heater.
●[HIGH QUALITY ANODE ROD] Our RV anode rod is made of magnesium AZ63 alloy, non-toxic and odorless. It can effectively inhibit limescale condensation on the inner wall and on the heat pipe. Regular replacement of RV hot water heater anode rod helps to avoid you from spending a lot of money to replace the RV water heater. Anode rod size is: 9 ¼" long, ¾" diameter with ¾" NPT thread, installation with 1-1/16" socket (socket not included) , Compatible with Suburban and Mor-Flo Water Heaters.
●[POWERFUL CLEANING] The nozzle of the water heater tank flusher can be adjusted to produce a powerful water jet. Foam tank can be used to store clean water more effective removal of dirt from the bottom of your RV water heater tank
●[INNOVATIVE DESIGN] This RV water heater flush wand can not only spray forward, but also to both sides, which can remove the scale and anode piece inside the water heater more effectively.
●[USE PRECAUTIONS] Before you are ready to maintain the water heater tank, be sure to turn off the water heater, cool the hot water, and release the pressure in the tank! To prevent you from injury, and splashing of sewage, please perform this operation. If you have any questions, please feel free to contact us via Amazon email.
[Flush Wand & 2 Anode Rods]
Description
Why Choose Xizopucy
Xizopucy RV Water Heater Tank Rinser, Metal Tube Water Tank Flusher Wand, Powerful Water Spray
Leaving sediment in the tank shortens the life of water heaters, even household water heaters!
Use our Xizopucy Water Heater Tank Rinser to cleanse and remove sediment from the bottom of the RV water heater!
Specification:
Material: Stainless steel (tube&nozzle head) / ABS (handle)
Length: 22inch (Approximately)
Nozzle Diameter: about 16mm/0.6in
Unscrewed Nozzle Diameter: about 11mm/0.4in
Three Water Spray Modes for Different Washing Need
1.Powerful spray mode: Powerful flushing, ideal for flushing water heater tank deposits
2.Large-area spraying mode: The spraying area is large and gentle, suitable for plant watering
3.Without nozzle mode: After removing the nozzle, A powerful spray can be generated to reach the bottom of the tank
for thorough cleaning.
Notes:
1. To prevent you from getting hurt, sewage splashing, always turn off the water heater, cool the hot water and relieve the pressure in the tank before you are ready to service the water heater tank!
2. Wrapping PTFE tape around the top of the anode rod nut will allow it to be installed on the tank a little tighter.
|
|
|
|
|
|---|---|---|---|
Step1Turn off the power to the water pump, gas supply, and electrical power to the water heater. |
Step2Remove the corroded anode rod and drain water heater Remove the corroded anode rod with a socket wrench And drain the water heater. |
Step3STEP 3. Flush water tank Flush out the sediment from the bottom of the tank thoroughly. |
Step4STEP 4. Replace new anode rode Apply PTFE tape to the threads of the anode to ensure a good seal. Replace and tighten securely with the socket wrench. |
If you are using a water heater tank, you should keep in mind that it will always be corroded by oxygen and other elements. We will give you a perfect solution to prolong its life and save your money and time!
1. The magnesium anode rods can attract corrosive elements to protect your water heater tank away from the damage of corrosion elements!
2. The sediment in the water tank will shorten the life of the water heater, so you can use our flusher with strong cleaning ability can help you easily remove all dead spots in the tank!
Warm Tips:
1. Please wrapping the PTFE tape around the top of the anode rod nut will allow it to be installed on the tank a little tighter.
2. Be sure to turn off your water heater before you are ready to clean the water tank!
