Feature
●Plastic
●【Detect Multiple Gases】- Home gas detector suitable for detecting LPG(Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas etc.
●【LED Digital Display & Sound Warning】- Gas Detector offers Voice Notification and a digital readout of the GAS concentration.When gas leak concentration reaches presetting level, the alarm provides a visual and audible signal. 85dB alarm sound, reduce the risk of gas explosion and protect your familys life and property safety.
●【Easy to Install】- Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas.
●【Widely Applyed 】-This product can be used as independent family alarm equipment, and also can be used as front detector of alarm system. Widely Used for Restaurant, Hospital,Hotel, Oil Factory,Garage, Gas Station etc.
●【Precautions】- The system warm-up time is about 2-3 minutes. During this time period, the gas test will not work. You need to wait for the display to show 0 (the system enters the working state) before it can be tested normally.Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas.
Description
Gas Detector for Home Natural
Natural Gas Detectors for Home
- It is an independent combustible gas alarm, adopts the international advanced gas sensing technology, and selects a cost-effective microprocessor as the control core.
- It is a small gas safety protection product suitable for use in the family. Leakage concentration, when the leakage concentration reaches the set value, the detector will issue an audible and visual alarm.
- When the indoor gas concentration is lower than the alarm setting value, the detector will automatically return to the normal working state, which can avoid the occurrence of personal casualties and property damage accidents such as poisoning, explosion and fire caused by the leakage of combustible gas.
Detector Parameters
- Detection gas: liquefied petroleum gas, natural gas, artificial gas
- Power supply voltage: AC100V~AC240V
- Power frequency: 50/60Hz
- Rated power: <2W
- Detected gas: natural gas, LPG, coal gas
- Alarm concentration: 3%LEL~20%LEL
- Alarm loudness: ≥85dB (3 meters away from the product)
- Working temperature: -10℃~40℃
- Operating temperature: <97%RH
Where Should Install the Alarm
Instructions for Using the Detector
For the natural gas and town gas detection:
It should be installed in the room where a gas escape is most likely to occur, this may be the kitchen because of the presence of a gas cooker and other gas appliances.
It should be installed above the level of a possible gas escape and near the ceilling(typically 0.3~1m from the ceiling), in place where air movements are not impeded by furniture and furnishings.
For LPG detection:
It should be installed in the room where the most frequently used appliance is accommodated and where an escape is most likely to occur. In most domestic premises, this room may be the kitchen because of the presence of a gas cooker and possibly other gas appliances.
It should be mounted as slow as possible(typically 0.3~1m above the floor) and in place where air movements are not impeded by furniture.