Feature

●Fitment:This Oil Cooler Flush Kit replacement for Ford 2003-2010 Diesel,works on EGR cooler equipped and EGR deleted trucks.
●Oil Cooler Flushing : Using this oil cooler can be Can be re-used over and over - no need for any part of the kit to remain on the vehicle.If the temperature difference exceeds the specification, it is recommended to perform oil cooler flushing to block damage to the engine and fuel system.
●Good Quatity :Excellent quality Made of high quality aluminum material which is totally corrosion and dust resistant, prevent high oil temperatures which cause expensive fuel system and engine failures.
●Save Money and Time:by back-flushing your 6.0L oil cooler rather than replacing it.
●About Service：Durable and Long Lasting Oil Cooler Flush Kit，the customer service period is 1 year.Note: Please check the display pictures to see before purchase.


Description

ford 6.0 oil cooler back flush kitford 6.0 oil cooler back flush kit

oil cooler backflush kit 6.0oil cooler backflush kit 6.0

6.0 ford oil cooler6.0 ford oil cooler

6.0 back flush kit6.0 back flush kit

Black Aluminum Anodize Adapter

Good Quality Brass Fitting

Detail

6.0 oil cooler backflush6.0 oil cooler backflush

Features

  1. Re-assemble the vehicle to its original condition, fill the system with the proper concentration of the correct coolant, and bleed the air from the cooling system. Then carefully check for any leaks.
  2. Operate the vehicle under load and compare engine and coolant temperature (Delta T) to verify that the oil cooler is restored to full function.
  3. When using the flush adapter, prevent water from flowing into the cooler, so that 100% of the water power passes directly through the cooler to achieve the greatest cleaning effect.

ford 6.0 oil cooler kitford 6.0 oil cooler kit

Instruction

  1. Drain the cooling system completely of the vehicle.
  2. Remove the rear coolant manifold cover from the top of the oil cooler cover by removing T-30 Torx head bolts.
  3. Install the flush adapter in place of the coolant manifold cover and replacement for the two T-30 bolts.
  4. the 45 degree brass elbow into the flush adapter.
  5. the flush hose assembly into the 45 degree adapter.
  6. Remove the lower radiator hose and place a large clean receptacle under the open end of the hose.
  7. Connect a garden hose to the flush adapter and flush until the water coming out of the lower hose runs clear.

Product information