Feature(may vary by option.)
●【Balanced 1/4" TRS to XLR Male Cable】This xlr to 1/4 quarter inch cable is used to output balanced/unbalanced audio signal from 1/4" port to xlr input device. Output device can be mixer, dj controller, podcast, keyboard, electronic drum, etc. These devices usually has 1/4" bal/unbal output port, which are usually marked with main out, control room, FX send, Master out, Sub out, Stereo out, Stereo return, etc. Input devices are usually powered speaker, stuido monitor, interface, AMP, etc.
●【TS replacement & active speaker】This stereo balanced trs cable can be used on unbalanced 1/4" mono TS port, please dont worry, only issue is that you can can still only get unbalanced output. For speaker connection, please only use for powered speakers, as passive speaker will need a preamp before it can play the sound. Please do not use to connect guitar to xlr mic input, due to mis-match impedance, your device will not receive the guitar signal.
●【 Noise-Free & Heavy Duty 】This trs to xlr adapter cord is braided design with nylon coating. The TRS tip is gold plated, it will transfer a more clear signal with no noise. Internal construction includes OFC spiral, silver paper coating and threaded cotton. These materials are all used to reduce signal interference, 90% OFC can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the connector, so the internal wire wont break out easily.
●【10FT X2】Package will come with 2X 3pin XLR male to TRS cables, each is 10FT/3meters, red color. Please double check if this length is right for you.
●【Customer Support】We offer 2 years warranty for this trs to xlr male cable, for any issues during the warranty time, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. Well give response within 12 hours.
[6.6FT 2Pack]
[25FT 2Pack]
Description
Mugteeve Instrument Cables
 3.5mm to dual 1/4inch cable |  dual 1/4" to dual RCA cable |  1/4" TRS to 1/4" TRS cable |
|---|---|---|
Length3.3FT, 6.6FT, 10FT | Length3.3FT, 6.6FT, 10FT | Length3.3FT, 6.6FT, 10FT, 15FT |
FeaturesGold plated plug, nylon braided heavy duty, OFC shielded no hum no buzz | FeaturesGold plated plug, dual pin cable, soft feeling, OFC shielded no hum no buzz | FeaturesGold plated plug, nylon braided heavy duty, OFC shielded no hum no buzz |
Balanced 1/4 inch stereo TRS to XLR male speaker cable, red Color, 10FT 2Pack
This 1/4" TRS to XLR male cable is used to output BAL/UNBAL signal from 1/4" port to XLR input device like studio monitor, mixer, amp, audio interface, etc. Balanced connection has better ability in noise resistance. It is mostly used on professional equipment and long-distance transimission.
Professional balanced 1/4" TRS to XLR male cable
Nylon braided, heavy duty
This balanced xlr male to 1/4inch cable is nylon braided design, it is strong and heavy duty. The connector of each cable has different colored ring, it will help you to distinguish right and left channel. You wont insert the connector into wrong jack by mistake.
OFC shield, no hum, no buzz
This mini 1/4" to xlr male cable is full covered with spiral OFC(Oxygen Free Copper). OFC layer can effectively keep out RFI and EMI. Under the OFC, there is also a aluminum foil layer. With OFC and aluminum foil layer, this cable will carry your signal without having to worry about interference.
Balanced connection
This xlr male to quarter inch trs cable is balanced connection. The tip of the TRS connector is linked to the No.2 hot pin of the XLR connector, Ring is linked to No.3 cold pin, shield is linked to No.1 ground pin.
Firm solder joints
Each connector has firm solder joints. It will make the cable last much longer and keep away from troubling repairing.
Important Notifications
TS Replacement
Balanced TRS cord can be used to replace TS cord. Only issue is that you can still only get unbalanced output signal.
Powered Speaker
For speaker connection, please only use for powered speaker, as passive speaker need a preamp before it can play the sound.
Not use for guitar
Please do not use this cable to connect guitar to a XLR input device, due to mis-match impedance, your device will not receive the guitar signal.
Keep out RFI and EMI
As common knowledge, please do not fold the cable or put the cable over AC power plugs, power adapters, chargers or others that ouput RFI and EMI.
