Feature(may vary by option.)

●Engine Lift Plate -- Fit for GM LSX LS1 Hoist Picker Crane 4.8 5.3 5.7 6.0 7.0 Gen III LQ4 LQ9 LS LS6 LM7 LR4 L59 L33. for All GM LS / Gen III 3 Series V8 Engines. Fits for 97-05/06 Gen III LS based engines. Fits for LS LSX LS LS1 LS2 LS3 6.0 5.3 5.7 series engines from 1997 to current.
●Function -- Lift the engine (or the transmission if it is still connected) from the vehicle safely and easily. Adjust the balance of engine and tilt engine.(NOTE: Intake manifold and valley cover tray must be removed to properly secure lift plate to engine block)
●Easy to USE -- The kit includes high-strength grade 10.9 zinc and yellow dichromate hex head screws and washers. Simply install the lift plate and screws into the engine, then you can easily lift and move the engine.
●Design -- Three lifting points allow for various chain placements for proper engine weight and balance offset. Picks up 10 bolt holes for maximum stiffness and ensure that the aluminum block is not damaged, and seal the motor from dust and dirt (or other random tools that may fall in while in storage).
●Superior Material -- Made of 3/16" carbon steel construction. Precise CNC plasma cutting of the mating board, and then mortise and tenon through welding them to obtain maximum torsional strength.

[A]




[B]





Description

11

Yoursme Engine Hoist Lift Plate

  • Professional Engine Hoist Lift Plate Kit.
  • This Engine Hoist Lift Plate Kit will be an Indispensable helper when you want to lift the engine from the vehicle safely and easily.
  • Save your time and energy.

Please check the model carefully before buying

  • Fit for All GM LS / Gen III 3 Series V8 Engines.
  • Fits for 97-05/06 Gen III LS based engines.
  • Fits for LS LSX LS LS1 LS2 LS3 6.0 5.3 5.7 series engines from 1997 to current.

11

Design

Three lifting points allow for various chain placements for proper engine weight and balance offset. Picks up 10 bolt holes for maximum stiffness and ensure that the aluminum block is not damaged, and seal the motor from dust and dirt (or other random tools that may fall in while in storage).

11

Function

Lift the engine (or the transmission if it is still connected) from the vehicle safely and easily.(NOTE: Intake manifold and valley cover tray must be removed to properly secure lift plate to engine block)

11

11

11

Engine Hoist Lift Plate

Made of 3/16" carbon steel construction. Precise CNC plasma cutting of the mating board, and then mortise and tenon through welding them to obtain maximum torsional strength.

Hex Head Screws

High-strength grade 10.9 zinc and yellow dichromate Hex Head Screws × 10.

Washers

High-strength grade 10.9 zinc and yellow dichromate Washers × 10.

1 1 1 1 1 1
Pressure Switch Installation Tool Kit 124740TL30 T-0158-HD Clutch Drum Spring Compressor Transmission Tool ST-1503 Stator & J-36418-C Turbine Shaft Teflon Seal Installer/Resizer 6706 Injector Rail Assembly Remover & GM245 Fuel Injector Seals Tool 6706 Injector Rail Assembly Remover Tool Oil Cooler install Kit 10263
FITMENT Fit for GM Transmissions 6L45 6L50 6L80 6T70 (Gen 1) 6T75 (Gen 1) Works with F 124740-30K. Suitable for Chrysler, GM, Turbo, Ford. for most common clutch drums up to 6 inches in size. (See detailed models in description page) Fit for Transmissions GM - 700-R4, for GM - 4L60, for GM - 4L60E, for GM - 4L65E, for GM - 4L70E Fit for 2010 - 2017 GM 2.0L & 3.6L engines with Hitachi Fuel Injectors; Fit for 2012 - 2017 GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch,Continental and Delphi Fuel injectors (See the description page for the specific model) Universal Fit for most of vehicles. Fit for 27 - 214 General Motors direct injection vehicles. (See the description page for the specific model) Fit for GM Duramax 2500/3500 Diesel 6.6L 2001-2010.

Product information