Feature

●[Individually Addressable LED Strip] The WS2812B is a digitally addressable pixel-based LED strip. Each SMD 5050 LED has an integrated driver IC that allows you to control color and brightness independently or add sophisticated lighting effects to your project. 256-bit luminance displays and 24-bit color display.
●[Compatible with multiple controllers] Because our WS2812 Digital Magic Strip works perfectly with Arduino, Ready to Go Library, FastLED Library and Raspberry Pi, it is compatible with K1000C, SP611E, SP110E, SP105E, SP108E, CSY07, CSY08, SP106E, SP107E and other controllers, you can design DIY effects according to different requirements.
●[Note] You need a 5V power supply and a pixel controller (not included). Please do not use higher voltage than 5 V, otherwise the entire strip will be damaged. In addition, each LED can be switched off individually without damaging the residual strip.
●[Easy Installation] Both ends are equipped with 3-pin JST-SM connectors for easy installation and separate power/ground cables at each end. The LED strips consist of 50 cm long FPCBs, so there is a solder joint on the strip every 50 cm. However, this small error does not adversely affect the performance of the tape.
●[Wide range of applications] WS2812B multicolor LED strips can be used in hotels, karaoke TV, bars, gambling halls, Christmas decorations to improve atmosphere, for cars/shops/homes, etc. use. Note: IP30 not waterproof, only suitable for indoor decoration; IP65 silicone coating waterproof, can be exposed to water for short time.

[White IP65 Waterproof 16.4FT 300LEDs]




[Black IP65 Waterproof 16.4FT 150LEDs]




[White IP65 Waterproof 3.3FT 144LEDs]




[Black IP65 Waterproof 16.4FT 300LEDs]




[Black IP30 Non-Waterproof 3.3FT 100LEDs]




[White IP30 Non-Waterproof 16.4FT 300LEDs]




[Black IP30 Non-Waterproof 16.4FT 300LEDs]




[Black IP30 Non-Waterproof 3.3FT 144LEDs]




[White IP30 Non-Waterproof 16.4FT 150LEDs]




[White IP30 Non-Waterproof 3.3FT 60LEDs]




[Black IP30 Non-Waterproof 16.4FT 150LEDs]




[White PCB IP30 Non-waterproof 3.3FT 144LEDs]




[Black IP30 Non-Waterproof 3.3FT 60LEDs]





Description

ws2812ews2812e
Voltage DC5V
IC type WS2812B IC
Power 15W-45W (0.1W~0.3W/LED)
LED quantity 30LEDs/M 16.4FT
Color Full color 24-bit
Color order G R B (NOT RGB)
Waterproof IP30/IP65
PCB Color Black/White
Package 1x 3 pin male connector, 1x WS2812B LED strip (power supply or controller is not included)
Power Light up 1 color（red or green or blue) 0.1W/LED . Light up 2 colors (red+green) 0.2W/LED , Light up 3 colors (red+green+blue=mixed white) 0.3W/LED
ws2812ews2812e

NOTE

  1. Use a voltage of DC5V. Higher than 5V will destroy it. The LEDs at the end will possibly be duller because of the high resistance and voltage drop as the current has to flow to the end. To fix this, you can add DC5V voltage every 5m.
  2. LED strip is made by 50cm FPCB, so there is one solder joint every 50cm on strip. But this small mistake has no bad effect on the performance of the strip. In fact, ALL LED strips available on the market are made in lengths of half a meter.

ws2812ews2812e

ws2812ews2812e

ws2812ews2812e

Cuttable

  • Each LED can be cut without damaging the rest of the strip. You can shorten, lengthen or bend them as you like.
  • Addressable

Self-adhesive

  • IP30 has an adhesive tape on the back. Just stick it on the bookshelf, TV, wine cabinet, ceiling or windowsill.
  • Dream Color

Can be connected in series

  • The LED strips can be connected individually with only 3-pin JST connectors, no soldering required.
  • Great for DIY
ws2812ews2812e

ws2812ews2812e

ws2812ews2812e

ws2812ews2812e

Important information

To report an issue with this product, click here.