Feature(may vary by option.)

●[✅Exclusive Technology] Facon’s world-famous Tank Heater Pads. Heater Pads are Designed and Engineered to protect RV holding tanks, pipes and steps from freezing. Winter convenience of Today’s RV’er. Provides water for RV, Camper, Trailer, Mobile home, Boat, Marine in winter.
●[✅Thermostat Controlled] Simply turn "ON" the power switch when the outside temperature is near to freezing. The heat will transfer to the tank immediately to starts protecting your holding tank from freezing up. Built-in thermostat is set to turn Itself on at 45°F(±5 degrees) and turn itself off at 68°F( ±5 degrees). The heater pad will not heat the tank if the temperature is not near freezing. Turn "OFF" the switch when the outside temperature remains above freezing, or RV is not in use.
●[✅Application] Voltage: 12Volts DC, 65Watt, 4.8A, 2-wires design without plug - convenience for fixed place installation. Red wire=positive (+); white wire=negative (-). Pad size L 12 x W 18 works efficiently up to 50 gallon holding tanks, such as fresh water tanks, grey water tanks and black water tanks.
●[✅Easy Installation] This product is single-sided heating, the heating elements was build to the pad with adhesive. Peel off the paper, and then stick the insulation pad with adhesive to the surface of the tank. Ensure the heat can transmit properly, It must be sticked to or wrapped around the holding tank. No item on the pad, heavy pressure on the pad will cause damage to the heating elements.
●[✅User Guidelines] Heater pad must be applied at a minimum ambient temperature of 68°F(20℃), and make sure fluids must be present before turn on the heater pad. Turn off the pad if no water inside the tank. The heater pad is not warm when touch the insulation pad.

[CW-T1218-R2 |  without Thermostat]





Description

尺寸尺寸

Size: 12 x 18

  • This size works efficiently up to 50 gallon holding tanks;
  • Please stick 2-3 pads to your tank if it larger than 50 gallon.
  • If two or more heater pads are to be used they must be connected parallel.

1218 725 825 313 B45 b85
Tank Heater Pad Tank Heater Pad Tank Heater Pad Elbow Pipe Heater Pads Engine Block Heater Pad Silicone Battery Heater Pad
Customer Reviews
4.2 out of 5 stars
395
4.1 out of 5 stars
182
4.1 out of 5 stars
150
4.3 out of 5 stars
110
4.3 out of 5 stars
84
4.2 out of 5 stars
127
Price $71.99 $40.99 $37.99 $43.58 $28.99 $32.99
Size 12 x 18 7-1/4 x 25 8 x 25 3 x 13 5 x 4 8-1/2 x 5-1/2
Voltages DC 12Volts DC 12Volts AC 120Volts DC 12Volts AC 120Volts AC 120Volts
Watts 65 W 78 W 84 W 7.5 W 50 W 60 W
Lead Wire Lengh 36 36 36 18 72 72
Thermostat Controlled
Currect 4.8 Amps 5.8 Amps 0.7 Amps 0.55 Amps 0.45 Amps 0.5 Amps
大图大图

Properly sized and installed Facon Heater Pads provide consistent & efficient protection as the first signs of freezing winter weather approach

Specifications:

  • Model# CW-T1218
  • Brand: Facon
  • Pad size (Inch): 12" x 18"
  • Foam Pad thickness: 3.0MM
  • Volts: 13.5 V DC
  • Power:65 W
  • Electric Current: 4.8A
  • Lead Wire Lengh: 36
  • Built-in Thermostat is set to turn on at: 45°F( + - 5 degrees)
  • Turn off at: 68°F( + - 5 degrees)
  • The heater pad should not get hot to the touch when its working
  • The heater pad must be sticked to or wrap around the holding tank
  • Do not put any item( like battery) above the heater pad

WiringWiring

Wiring:

  • Red Wire = Positive(+), connect to RV power wire;
  • White Wire=Negative(-), connect to RV negative wire;
  • White wire end with connector can be wired to the metal frame on your RV/Camper, if your RV / Camper do not have negative wire
  • Please wire the heater pad to on&off switch in your RV Camper for easy control.
  • As long as the on/off switch is in the on position and electrical power is supplied, the heater pad will continuing cycle preventing freezing.
  • If your RV dont have switch, please buy a Facon heater pad switch in our store.

CAUTION: Do not install the tank heater on a circuit with a Pump Motor or Microwave Oven

Heater padHeater pad

CAUTION: The heater pad should not get hot to the touch and make sure fluids must be present before turn on the heater pad

  • The build-in thermostat in the heater will turn “ON” the tank heater so soon as the tank temperature drops to 45°F( + - 5 degrees).
  • The tank heater immediately stars protecting your holding tank from freezing up.
  • When the temperature in the holding tank rises to 68°F( + - 5 degrees), the tank heater will automatically turn “ OFF”.
  • Turn the power switch “OFF” when the outside temperature remains above freezing, fluids have been vacated, or Summer is coming, or RV is not in use.
  • Need to add several pipe elbow heater pads to your RV Pipe and Elbow at the same time.
  • The heater pad should not get hot to the touch.
  • It draws around 4.0Amps ~ 4.8Amps when wired to 12 ~13.5Volts DC power and start working when outside temperature under 45°F( + - 5 degrees) .
  • The heater pad should not heat the tank if the temperature is not near freezing.

Please install the heater pad correctly according to instructions - the heater pad must be sticked to or wrap around the holding tank. Do not put any item( like battery) above the heater pad.

11

22

33

For Fresh Water Tank

Black Water Tank

Grey Water Tank