Feature

●Inside Diameter 1.25/32mm - Overall Length 72.00/1830mm
●Universal, REAL GALVANIZED STEEL, Super Flexible, Heavy Duty
●FORTLUFT provides the warranty for the Exhaust Flex Connector Standard Caps tightness for the 12 months period or during the next 15000 miles (24000 km), after the spare part installation.
●Universal Exhaust Flex Tube is a part of the exhaust system of trucks, commercial vehicles, gasoline and diesel generators, as well as other industrial aggregates. This spare part compensates for vibration in the exhaust system protecting it from breakdowns and favoring the comfortable use of the mechanism.
●The Exhaust Flex Tube FORTLUFT is 100% tight, bends well and is made of heat-resistant galvanized steel. The Exhaust Flex Tube could be mounted by using conventional U-clamps or by welding.

[Connector Standard Caps 1.75  x4.00    & 45x102mm]




[Connector With Extension Pipes 2.50  x4.00  x8.00    & 63.5x102x203mm]




[Connector Standard Caps 1.75  x10.00    & 45x254mm]




[Connector With Extension Pipes 3.00  x6.00  x10.00    & 76x152x254mm]




[Bellows 2.00  x3.25    & 50.8x82mm]




[Connector With Extension Pipes 1.50  x4.00  x8.00    & 38x102x203mm]




[Connector With Extension Pipes 2.00  x8.00  x12.00  & 50.8x203x305mm]




[Connector Standard Caps 2.00  x10.00    & 50.8x254mm]




[Connector Standard Caps 1.75  x6.00    & 45x152mm]




[Connector Standard Caps 1.50  x4.00    & 38x102mm]




[Connector With Extension Pipes 2.50  x10.00  x14.00    & 63.5x254x356mm]




[Bellows 2.50  x4.00    & 63.5x100mm]




[Flex Tube 1.00  x72.00    & 25.4x1830mm]




[Flex Tube 1.75  x72.00    & 45x1830mm]




[Super Flex 3.00  x4.00    & 76x102mm]




[Connector Standard Caps 2.50  x8.00    & 63.5x203mm]




[Connector With Extension Pipes 2.50  x8.00  x12.00    & 63.5x203x305mm]




[Connector With Extension Pipes 2.50  x6.00  x10.00    & 63.5x152x254mm]




[Bellows 2.25  x3.00    & 57x76mm]




[Super Flex 2.50  x6.00    & 63.5x152mm]




[Connector Standard Caps 3.00  x10.00    & 76x254mm]




[Connector With Extension Pipes 2.25  x6.00  x10.00    & 57x152x254mm]




[Connector Standard Caps 2.00  x4.00    & 50.8x102mm]




[Connector Standard Caps 2.25  x10.00    & 57x254mm]




[Connector With Extension Pipes 3.00  x8.00  x12.00    & 76x203x305mm]




[Connector Standard Caps 2.50  x4.00    & 63.5x102mm]




[Connector With Extension Pipes 2.25  x8.00  x12.00    & 57x203x305mm]




[Connector Standard Caps 3.00  x4.00    & 76x102mm]




[Connector With Extension Pipes 3.00  x10.00  x14.00    & 76x254x356mm]




[Flex Tube 1.50  x72.00    & 38x1830mm]




[Connector Standard Caps 2.25  x8.00    & 57x203mm]




[Flex Tube 2.00  x72.00    & 50.8x1830mm]




[Connector With Extension Pipes 1.75  x10.00  x14.00    & 45x254x356mm]




[Connector Standard Caps 2.50  x10.00    & 63.5x254mm]




[Bellows 1.50  x2.75    & 38x70mm]




[Bellows 3.00  x4.00    & 76x100mm]




[Connector Standard Caps 2.25  x4.00    & 57x102mm]




[Bellows 1.75  x2.50    & 45x63.5mm]




[Connector Standard Caps 3.00  x8.00    & 76x203mm]





Description

Exhaust Superflex Connector

The Exhaust Superflex Connector FORTLUFT consists of four layers. The outer layer is made from high-quality stainless steel using the Superflex weaving technology. The inner layer is presented by the sealed stainless steel flex tube, which gives the flex pipe additional reliability and durability. Between these layers, there is a double-layer bellows (Stainless Steel double-ply construction), also made of AISI 304 stainless steel. Standard Caps are installed on both sides of the exhaust Superflex connector, they securely fasten all four layers and allow the spare part to be mounted in the exhaust system by welding exhaust pipes.

Malfunctioning exhaust Superflex pipe can be easily replaced with a new one without the necessity to purchase the entire exhaust unit. Moreover, there is no need to remove the whole exhaust system. Only to cut out the failed exhaust flex pipe and install a new spare part using the welding method instead would be enough.

About the CompanyAbout the Company

OUR MISSION

Endless improvement and driving changes fast

carpartscarparts

OUR GOALS

  • To provide each customer with high-quality services
  • To take responsibility for the quality of our products
  • To do our job with a smile and in a good mood!

carpartscarparts

THE COMPANY TODAY

The head office is located in Brooklyn, NY, USA. Manufacturing facilities, situated in the United States, Europe, and Asia, regularly fabricate a wide range of company’s products.Our engineers develop new products, refine and improve existing models, that are demanded and successfully used by our customers.

The advanced corporate management system is based on up-to-date information technologies and relevant approaches to company administration and business development.

Product information