Feature

●Connection Bore Diameter: 5mm to 1/4 inch; Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch; with M4 Screws
●Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies.
●Top tight type rigid coupling with 2/4 screws to hold the shaft tightly; high torque with rigidity, low inertia and excellent sensitivity.
●NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use.
●Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling.

[5mm to 6mm]




[5mm to 7mm]




[5mm to 8mm]




[6.35mm to 8mm]




[8mm to 8mm]




[5mm to 5mm]




[4mm to 4mm]




[3mm to 8mm]




[4mm to 8mm]




[4mm to 7mm]




[4mm to 6mm]




[5mm to 6.35mm]




[7mm to 8mm]




[6.35mm to 6.35mm]




[6mm to 8mm]




[6mm to 6mm]





Description

UXCELL coupling series

rigid coupling seriesrigid coupling series

Rigid Coupling

Rigid Couplings can offer a solid connection between two shafts with high precision and torque. It has no misalignment absorption capabilities. No movement is allowed between the two shafts and the machine system requires lubrication in many times.

Specifications & Features & Applications

rigid couplingrigid coupling

DIYDIY

rigid couplingrigid coupling

robotrobot

Know the size you need

We provide various kinds of rigid flange coupling for choosing.Please check the correct size-d1,L and D before purchase.

DIY applications

Iron Plating, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace

CNC Machine

Rigid Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc.

Robot Replacement

A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly.