●Brand New & High Quality ●The working voltage of 3.3 V to 5 V ●The output format: digital switch output (0 and 1) ●Small board PCB size: 32 mm x 14 mm/1.28 x 0.56in ●The LM393, use of wide voltage comparator
[4PIN]
[3PIN]
Description
Application:
Light intensity detection, intelligent car light module, with directional, only sense light source in front of the sensor, better to use for searching light.
Can detect the brightness and the ambient light intensity (compared with photo-resistor, this module has better directionality , can sense light in fixed direction)
Adjustable sensitivity (use the blue digital potentiometer to adjust)
Operating Voltage: 3.3V-5V
Output Format : DO digital switching outputs (0 and 1) and AO analog voltage output
Has a fixed bolt holes for easy installation
PCB Size : 3.2cm * 1.4cm
Module Instructions:
Photodiode module is most sensitive to environmental light intensity , generally used for detecting the ambient brightness and light intensity , can be common with photosensitive resistance sensor module in most cases , the difference between this two is that Photodiode module has a better directionality, can sense light in fixed direction;
When ambient light intensity does not reach the threshold value, the module DO port output high; when the ambient light intensity exceeds a set threshold, the D0 output low;
Digital outputs D0 can be directly connected with the microcontroller through the microcontroller to detect high and low , thereby detecting the light intensity changes in the environment;
Analog output and the AD conversion process, can achieve higher accuracy.