Feature
●Note: We recommend checking the signal type of your remote to ensure it is IR before ordering. Some devices use RF instead of IR for remote control.
●10-channel system allows you to set up multiple IR systems that dont interfere with one another
●Includes USB and AC power cables, extra IR cables, and mounting adhesive
●Incompatibility: Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector
●BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results, we recommend attaching the included optional IR emitter cables so that the emitter is directly above the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control, rather than sitting in front of them
Description
BlastIR Wireless Pro
Control all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from behind walls or closets by extending the IR signal with this kit.
|
|
|
|
|
|---|---|---|---|
Multi-Zone ControlThe BlastIR Wireless Pro supports up to ten zones with independent sending/receiving frequencies. (Kind of like different channels on a walkie-talkie). You can change the zone by using a very small rotating switch located at the bottom of the receiver and emitter pucks. The Receivers will only communicate with the Emitters that are set to the same zone. You can also purchase extra Emitters, or Receivers individually if you do not need an extra full pair. - Make sure that they receiver and emitter are set to the same desired channel before use. If they are on a different channel, then the emitter will not recognize the signal from the receiver. |
All-to-AllThe BlastIR Wireless Pro can be set to send the signal from all Receivers to all Emitters by setting all the units to the same "Channel" or "Zone". |
Zone-To-ZoneThe BlastIR Wireless Pro can be set to only send the signal from one Receiver to specific emitters. |
Low-ProfileEach unit is no bigger than an average cookie. |
Extend Reach with IR Emitter and Receiver Cable (Optional)
You can use the included Receiver and Emitter cables to further minimize whats seen on your setup. Magnetic Feet and Adhesive pads are also included to mount the BlastIR Wireless out of sight when using the IR Receiver and Emitter Cables.
|
|
|
|
|
|
|---|---|---|---|---|---|
| BlastIR Wireless Pro | BlastIR Wireless PRO - Emitter Only | BlastIR Wireless Pro - Receiver Only | BlastIR Classic | BlastIR Link | |
|
|
|||||
| Customer Reviews | 1,305
| 31
| 36
| 711
| 49
|
| Price | $64.95 | $37.98 | — | $36.95 | $44.98 |
| Extension Type | Wireless | Wireless | Wireless | Wired | Wired over Cat5e/6 |
| Distance | 330 ft. (distance may vary due to obstacles) | 330 ft. (distance may vary due to obstacles) | 330 ft. (distance may vary due to obstacles) | 6ft. Receiver cable + 9ft. Emitter cables included | 980 ft. over Cat5e/6 |