Feature(may vary by option.)
●🛠「WHAT YOU WILL GET」- The gas hose connector kit mainly includes a 72in gas hose, 2 pc 15/ 16 -16 UN x 1/2 FIP, 2 pc 15/ 16 -16 UN x 1/2 MIP (Tapped 3/8 FIP) and a sealing tape. Factory leak tested 100% pass!
●🛠「COMPATIBLE WITH」- A stainless steel gas line hose mainly use for connecting gas stove, gas dryer, furnace, gas water heater. Gas pipe outside dimension of 5/8, inner diameter 1/2. Thicker pipe diameter can transmission gas quickly.
●🛠「STURDY MATERIAL」- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, comes with a 1/2" male brass fittings on both end, standard male and female pipe threads for easy connection.
●🛠「EASY TO INSTALL」- Easy to install the hose connector kit for your gas dryer. Only one wrench and a little bit teflon tape are all you need to install the hose.
●🛠「CAUTION」- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or at another location. Test for leaks only with leak test solution. Rinse with clean water after leak testing.
[1 & 2 - 48in]
[3 & 4 - 36in]
Description
Kinchoix Gas Hose Connector Kit for Your Convenience
Gas Hose Connector Kit for Stove, Dryer, Gas Water Heater
Kinchoix Gas dryer hose kit is easy to install, can be cut and bent at will, while the inner warp flow remains unchanged, and it can be bent and passed freely in a narrow space.
If you’re a DIY person be sure to check for leaks after installing. If you don’t have a leak detector then use some watered down dish soap to check for bubbles at the connections. Keep your home and gas appliances safe!
USE DESCRIPTION
Feature
100% Factory leak tested
Indoor or Outdoor Use
CSA Approved
304 Stainless Steel flexible tubing with Stainless steel end fittings
Specification
48IN 1/2" Size: 48 In. Long 5/8 In. Outlet Diameter 106,000BTU
60IN 1/2" Size: 60 In. Long 5/8 In. Outlet Diameter 93,200BTU
72IN 1/2" Size: 72 In. Long 5/8 In. Outlet Diameter 86,000BTU
24IN 3/4" Size: 24 In. Long 1 In. Outlet Diameter 290,900BTU
36IN 3/4" Size: 36 In. Long 1 In. Outlet Diameter 255,900BTU
Color: Yellow Coated
Material: 304 Stainless Steel
Rated: 106,000BTU/ 93,200BTU/ 86,000BTU/ 290,900BTU/ 255,900BTU
Used for: Ranges, stoves, furnaces or boilers
What You Will Get
Gas hose connector kit mainly includes a gas hose, 2 pc 15/ 16 -16 UN x 1/2 FIP, 2 pc 15/ 16 -16 UN x 1/2 MIP (Tapped 3/8 FIP) and a sealing tape. Factory leak tested 100% pass!
Widely Use
Gas range connector kit is suitable for most traditional devices. Such as gas stove, gas dryer and gas water heater.
The gas water heater connection kit can also be used indoors or outdoors.
FOR YOUR SAFETY:
- The connectors and fittings are designed for use only on the original installation and not to be reused for another gas appliance or atanother location.
- If you smell gas, turn off the gas supply to the applianceand have a qualified/ competent individual correct the source of leak.
- Gas connector use is intended for the gas connections between the gas supply and the gas inlet of a fixed appliance for indoor installation.
- The connector is not to be used for connection to an LP-gas container mounted on or adjacent to a park trailer or many factured(mobile) home.
- Gas connector is not to be installed underground or used in contact with the ground,the connector must to be concealed within or run through any wall, floor or partition.