[SLIVER-II]
[BLACK-II]
TOPPING L30 II is a high-performance linear headphone amplifier that supports RCA input and output,equipped with a 6.35mm headphone jack and gain selections function.
Improved NFCA
L30 II uses redesigned NFCA (Nested Feedback Composite Amplifier) module. It provides 2x output power at 300Ω load compared to L30. The new circuit has 0.3uV ultra low noise and 144dB dynamic range as well as 0.00006% THD+N.
Sound quality is never a problem
With the help of NFCA, L30 II easily reach the top of the industry,and it has almost perfect performance regardless of distortion, dynamic range,and multi-tone testing.
Low distortion while outputting high power
The L30II can maintain ultra-low distortion output under high power load. Under 32 ohm load and 2500mW output,the THD+N is lower than 0.00008%; under 300 ohm load and 300mW output,the THD+N is lower than 0.00007%.
Three gain settings to suit different needs
L30 ll has three gain options:-14dB,0dB,16.5dB.Improved gain settings can cover a wider range of needs to meet the needs of different headphones from low-sensitivity full-sized over-ears to high-sensitivity IEMs.With the help of extremely low noise 0.3uV,even IEMs will not hear any background noise.
THD+N @1kHz (A-wt): <0.00006% @Output=500mW(32Ω); <0.00005% @Output=80mW(300Ω)
THD @20-20kHz 90kBW: <0.00008% @Output=500mW(32Ω); <0.00007% @Output=80mW(300Ω)
SNR @MAX OUT 1kHz (A-wt): 144dB
Dynamic Range @1kHz (A-wt): 144dB
Frequency Response: 20Hz-40kHz(±0.05dB)
Output Leve:14Vpp @G=L; 31Vpp @G=M; 37Vpp @G=H
AP measured noise level (A-wt): <0.7uVrms @G=L; <0.7uVrms @G=M;<1.5uVrms @G=H
Actual noise level* (A-wt): <0.3uVrms @G=L; <0.3uVrms @G=M; <1.4uVrms @G=H
Channel Crosstalk @1kHz: -92dB
Input sensitivity: 25Vrms @G=L; 11.2Vrms @G=M; 2.0Vrms @G=H
Gain: -14.0dB @G=L; 0dB @G=M; 16.5dB @G=H
Output Impedance: <0.1Ω
3500mWx2 @16Ω THD+N<0.1%;2700mWx2 @32Ω THD+N<0.1%;2000mWx2 @64Ω THD+N<0.1%560mWx2 @300Ω THD+N<0.1%
3500mWx2 @16Ω THD+N<0.1%;2700mWx2 @32Ω THD+N<0.1%;2000mWx2 @64Ω THD+N<0.1%;560mWx2 @300Ω THD+N<0.1%
Load Impedance: >8Ω
THD+N @1kHz (A-wt): <0.00006%; THD @20-20kHz 90kBW: <0.00007%
SNR @MAX OUT 1kHz (A-wt): 144dB
Dynamic Range @1kHz (A-wt): 144dB
Frequency Response: 20Hz-40kHz(±0.05dB)
Output Level: 14Vpp @G=L; 31Vpp @G=M; 37Vpp @G=H
AP measured noise level (A-wt): <0.7uVrms @G=L; <0.7uVrms @G=M; <1.5uVrms @G=H
Actual noise level* (A-wt): <0.3uVrms @G=L; <0.3uVrms @G=M;<1.4uVrms @G=H
Channel Crosstalk @1kHz: -92dB
Input sensitivity: 25Vrms @G=L; 11.2Vrms @G=M; 2.0Vrms @G=H
Gain: -14.0dB @G=L; 0dB @G=M; 16.5dB @G=H Output Impedance: 20Ω
L30 IIs output has high output voltage,high current,low output impedance,so no headphones that cant be dealt with. High output voltage can easily drive high impedance headphones; High output current allows low-sensitivity headphones to obtain enough power; The low output impedance will not bring unnecessary effect on FR when driving low-impedance headphones. Different headphones can be easily driven by the L30II.
TOPPING L30 II | TOPPING L50 | TOPPING A30Pro | TOPPING A90 Discrete | TOPPING DX3Pro+ | TOPPING DX5 | |
---|---|---|---|---|---|---|
Audio Device | NFCA Headphone Amp | NFCA Headphone Amp | NFCA Headphone Amp | Fully Discrete Balanced Headphone Amplifier + Preamp function | DAC&Headphone amp | DAC&Headphone amp |
Input | RCA | 6.35mmTRS + RCA | RCA/XLR | XLR/RCA/EXT | USB/OPT/COAX1/COAX2/BT | USB/BT/OPT/COAX |
Output | 6.35mm headphone + RCA | 6.35mm/4-PIN-XLR headphone + + 6.35mmTRS + RCA | 6.35/4.4mm/4-PIN-XLR headphone + 6.35mmTRS + RCA | 6.35mm/4.4mm/4-PIN-XLR headphone + XLR/RCA | 3.5mm headphone + RCA | 6.35mm/4-PIN-XLRheadphone + XLR/RCA |
Output Power | 3500mW×2@16Ω,2700mWx2@32Ω,2000mWx2@64Ω,560mWX2@300Ω | 3400mW×2@16Ω, 2800mWx2@32Ω, 2000mWx2@64Ω, 540mW×2@300Ω, 290mWx2@600Ω | 6000mWX2@16Ω,5500mW×2@32Ω,840mW×2@300Ω | SE: 3300mWx2@16Ω,2000mW×2@32Ω,1100mW×2@64Ω,250mWx2@300Ω,500mW×2@600Ω BAL: 9800mWx2@16Ω,6700mW×2@32Ω,4000mW×2@64Ω,1000mW×2@300Ω,500mW×2@600Ω | 1800mW×2@32Ω, 1000mW×2@64Ω, 250mW×2@300Ω | 1800mW×2@32Ω,1000mW×2@64Ω,250mW×2@300Ω |
GAIN | -14/0/16.5 dB | -14.3/0.1/13.9 dB (SE),-14.5/0.3/13.7 dB(BAL) | -14/0/14 dB | 0/9.5dB(SE IN SE OUT), -0.2/9.3dB(BAL IN SE OUT), 6.0/15.5dB(SE IN BAL OUT), 5.8/15.3dB(BAL IN BAL OUT) | 6.0/19 dB | 6.7/19 dB |
TND+N@1kHzA-wt | <0.00006% | <0.00006% | <0.00006% | <0.000055% | <0.00015% | <0.0001% |
SNR | 144dB | 145dB(SE),140dB(BAL) | 145dB | 141dB(SE IN SE OUT), 137dB(BAL IN SE OUT), 145dB(SE IN BAL OUT), 138dB(BAL IN BAL OUT) | 120dB | 125dB |
Output Impedance | <0.1Ω | <0.1Ω | <0.1Ω | <0.1Ω(SE),<0.2Ω(BAL) | <0.1Ω | <0.1Ω |
Remote control | ✓ | ✓ | ✓ | |||
Recommended combination | TOPPING E30 II DAC | TOPPING E50 DAC TOPPING PA5 AMP | TOPPING D30Pro DAC | TOPPING D90SE/LE DAC TOPPING LA90 AMP | TOPPING PA3s AMP | TOPPING PA5 AMP |