●☞4 WAY SWITCH MODE --- The pet door could be adjusted by the Red and Green switches with tabs to 4 modes: out only, in only, both in and out, and fully locked, easy control of your pets in and out. ●☞SIZE & APPLICATION --- Outer Size: 9.8" x 11" x 0.94"(W x H x D), Inner size: 7.9" x 8.7"(W x H), Cut-Out Size: 8.3" x 9.5" (W x H), suitable for mounting on glass door or windows, suitable for cat and doggie lighter than 27.54 lb and waist circumference shorter than 24.8" ●☞SAFE & THOUGHTFUL --- The transparent flap let pet see through the door. Exterior rain seal is for waterproof. Brush strip eliminates noise from the door closing. ●☞EASY TO INSTALL --- Complete instructions included, make you easily install in windows, glass ,metal door etc. ●☞EXCELLENT QUALITY --- Made of ABS material, weather-resistant, the surface is smooth and durable.
[White]
[Black]
Description
Extra Large Cat Door Specifications
Note:
Outer Size: 9.8" x 11" x 0.94"(W x H x D);
Inner size: 7.9" x 8.7"(W x H);
Cut-Out Size: 8.3" x 9.5" (W x H);
Fit Cats up to 25.54 lbs (The waistline less than 24.8" );
Material: ABS plastic
Color: White
Style: Flap
Weight: 1.04 lb
Make sure that the width and height(shoulder level) of the pet are inferior to the pet screen door, thanks.
The depth of window/glass/metal door you are going to install to had better less than the depth 0.47", so as to screw in 4 screws from one sides easily.
Package Includes of CEESC Extra Large Car Door :
1 X Large Cat flap door
4 X Screws
4 X Nut
8 X Screw caps
1 X Installation instructions
Assemble instructions
1. Draw outline on the paper board
Draw the cat door frame on a paper board and cut it down.
Note:
You had better prepare these necessary tools first, pencil, ruller, electric saw, drill, screwdriver, double-side tape.
2. Draw outline on the glass door
Use a pencil draw around the edge of the cut paper on the glass door you want to be fixed to.
Note:
Generally, average installation height is around 10-15 cm from the floor.
3. Drill 4 corners for holes
Drill 4 corners for thorough holes first with an electric drill.
Assemble instructions
4.Cut out a tunnel hole
First, youd better drill holes in the corners of the outline. To do this is for cutting out the whole block of tunnel hole with a saw.
5. Drill holes for screws
Mount the cat door with double-side tape to the door. 4 screws have been provided for your use, tighten them with a screwdriver on one sides, its suitable for glass door.
6. Done
Note:
please take of the height of glass/window/door you install the cat door to, usually, 10-15CM from the floor is ok. If too high, your cat cant jump up to reach the cat door.
Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.