Feature(may vary by option.)

●Low Temp Self Soldering : with one step, you get a soldered, sealed, and insulated connection.
●Shrink Tube is Thicker: Excellent stretch and mechanical damage resistance. Quality and durability is outstanding!
●Waterproof : Low heat solder and hot melt adhesive can produce perfect seal, protect electrical connections.
●Easy to Use: Simply position the stripped wires into the solder sleeve and apply heat to finish the connection. Makes butt connections a breeze. Electrical work gets cut in half!
●Compliant with All Relevant Standards: Compliant with ROHS, ISO 9001:2008, SGS and CE standards.

[250pcs Kit]




[White 26-24 AWG]




[Red 22-18 AWG]




[Blue 16-14 AWG]





Description

XUUAP Heat Shrink Butt Solder Seal Wire ConnectorsXUUAP Heat Shrink Butt Solder Seal Wire Connectors

XUUAP is a professional manufacturer in heat shrink connectors, terminals.

XUUAP only use high quality copper, solder, and adhesive lined tubing to craft our wire connectors which could be widely used in automotive, marine and home project applications.

No Crimping Self Solder Heat shrink wire connectorsNo Crimping Self Solder Heat shrink wire connectors

heat-shrinkable tube hot melt adhesive insideheat-shrinkable tube hot melt adhesive inside

Insulated Water Resistant wire butt connectorsInsulated Water Resistant wire butt connectors

Easy to Use

Strip the wire away from the insulation and insert the Connector. Apply heat while rotating the connector.

Heat-Shrinkable

Shrinkage ratio 2:1. Polyolefin heat shrink butt connectors improve Pullout Strength.

Insulated & Water Resistant

Hot-melt adhesive provides excellent waterproof property. Melted solder ensures wires Strongly Connected.

solder seal red 14-16 gauge terminal solder seal red 14-16 gauge terminal

solder seal red 18-22 ga connectorssolder seal red 18-22 ga connectors

self-solder wire connectors 18-22ga redself-solder wire connectors 18-22ga red

home improvement wire connect home improvement wire connect

automotive wiring connector automotive wiring connector

motorcycle wiring connectormotorcycle wiring connector

Wide Applications: home improvement

Vehicles: cars, trucks, golf carts, trailers

motorcycle, boat, DIY electrical wirings and other outdoor applications.

300pcs 22-14 gauge solder seal wire connectors 300pcs solder seal wire connectors Kit 400pcs 22-18ga gauge solder seal wire connectors 250pcs solder seal butt connectors kit assortment 100pcs solder seal wire connectors AWG 16-14 blue 100pcs 24-26ga gauge solder seal wire connectors
300pcs Red and Blue Solder Seal Connectors 300pcs Solder Seal Connectors Kit 400pcs Solder Seal Red Connectors 250pcs Solder Seal Butt Connectors Kit 100pcs Solder Seal Blue Connectors 100pcs Solder Seal White Connectors
Quanitity 300 300 400 250 100 100
AWG 22-14 26-10 22-18 26-10 16-14 26-24
Connection type Solder Seal Solder Seal Solder Seal Solder Seal Solder Seal Solder Seal
shrink ratio 2:1 2:1 2:1 2:1 2:1 2:1

Solder Seal Heat Shrink Wire Connectors:

  • Easy to Use - Makes butt connections a breeze. Electrical work gets cut in half!
  • You need a good wire stripping tool, and a reliable heat gun or lighter for melting the solder and shrinking the tubing.
  • Basically, with one step you get a soldered, sealed, and insulated connection. It does take a bit of practice but once you get the hang of it, its pretty neat.

Technical Specifications:

  • Shrinkage ratio 2:1.
  • Waterproof Rating: IP67.
  • Material: Polyolefin Tubing with Solder and hot melt adhesive Inside.
  • Minimum temperature for solder to melt: 280°F / 138°C
  • The temperature of the solder completely melted: 320°F / 160°C
  • Minimum shrink temperature: 176°F / 80°C
  • Operating temperature :-67°F / -55℃ - 257°F / 125℃

Note:

  • For best result, please use a hot air gun and rotate the connector to evenly apply heat.
  • Please raise the temperature from low to high gradually when you use the hot air gun to heat the wire connector.
  • Please DO NOT set the high temperature at the beginning, or the surface of connector will be over-heated, which will lead to the tube melt while the solder ring still not melt.
  • Keep the hot air gun at the proper distance. Dont get too close.