Feature

●Easier handling: Sheave mounted on sealed ball bearings for excellent efficiency.
●Multiuse: Gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor
●Versatile: May be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis and to limit the risk of it flipping.
●Lock it up: Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place.
●Fully equipped: The H profile of carabiner ensures an improved strength-to-weight ratio and protects markings from abrasion.


Description

Pulley-carabiner available in A and Z models with various lock mechanisms.

ROLLCLIP A is a pulley-carabiner with a gate opening on the pulley side that facilitates installation of the rope when the pulley is fixed to the anchor. It is available with an automatic TRIACT-LOCK locking system, or without a locking system. ROLLCLIP A may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis, to limit the risk of it flipping and to keep it integrated with the device.

ROLLCLIP Z is a pulley-carabiner with a gate opening on the non-pulley side to facilitate installation on anchors and devices. It is available in two locking systems: automatic TRIACT-LOCK system or manual SCREW-LOCK system.

  • Easier handling: - sheave mounted on sealed ball bearings for excellent efficiency - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along the major axis and to limit the risk of it flipping - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place
  • H cross-section of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion
  • Available in A and Z versions with various locking mechanisms.

  • Material(s): aluminum
  • Min. rope diameter: 7 mm
  • Max. rope diameter: 13 mm
  • Sheave diameter: 18 mm
  • Maximum working load: 2 x 2 = 4 kN
  • Efficiency: 85 %
  • Major axis strength: 20 kN
  • Minor axis strength: 8 kN
  • Open gate strength: 7 kN

Petzl Rollclip A Non-LockPetzl Rollclip A Non-Lock

Petzl Rollclip A Triact LockPetzl Rollclip A Triact Lock

Petzl Rollclip Z Screw-LockPetzl Rollclip Z Screw-Lock

Petzl Rollclip Z Triact LockPetzl Rollclip Z Triact Lock

P74

Petzl Rollclip A Non-Lock

P74 TL

Petzl Rollclip A Triact-Lock

P75 SL

Petzl Rollclip Z Screw-Lock

P75 TL

Petzl Rollclip Z Triact-Lock.

Petzl P74Petzl P74

Petzl P74Petzl P74

Petzl P75Petzl P75

Petzl P75Petzl P75

The ROLLCLIP A pulley may be used as a directional point on the lower attachment point of the ASCENSION handled rope clamp, for short rope ascents. Gate opening on the pulley side facilitates installation of the rope.

The ROLLCLIP A pulley can be used as a directional point when combined with the RESCUCENDER rope clamp.

The ROLLCLIP Z pulley may be used as a directional point on the upper attachment point of the ASCENSION handled rope clamp, for short rope ascents. Gate opening on the non-pulley side facilitates installation on the ASCENSION.

The ROLLCLIP Z pulley can be used for tree care to attach the ZIGZAG descender to the attachment bridge on the SEQUOIA harness, for improved lateral mobility

Product information