Tested and confirmed as follows to be Compatible with -
- Works With and Compatible: Samsung STB SMT-H4372, Scientific Atlanta Explorer 46xxHDC Series, Explorer 8642hdc, 9865HDC, 8742HDC Explorer (with IR IN port on the back panel) Comcast X1 RNG Set Top Boxes VERIZON HD DVR QIP 7xxx series and VM1101 model
- Works With and Compatible: Cisco CHS435HDC, CH335HDC HD DVR, Cisco 8640HDC, 4640HDC& 4742hdc
- Works With and Compatible: LG LST-4600A HD PACE DC551P, DC55 PACE/ Pace rng110/ DC700X Apache.
- Works With and Compatible: Comcast X1, RNG110, PACE / CiscoRNG150, RNG100, PACE TDC787X HD, PACE TDC 575D DVR, DC50X, DCH100, DCX3300, DCX3220e, DCX3400M, DCX700, DCX3416, DCX3425, DCX3432, DCX3501, DCX3600, MVIX 760 HD Media Player. DTA50, DTA250 and other DTA models
- Spectrum cable box DCX3510-M, Frontier FIOS cable box, Frontier/Verizon/ Fios wireless box/client.
- Cisco cable box on Spectrum cable services
Will Not Work With: Please Review -
- Not Compatible with: Motorola DCT or DCH Series, QIP2500,
- Not Compatible with: SA Explorer 4200, 4200HDC,4240 HDC4250,4250HD,8240HDC,8260HDC,8200 series 8300, 8300HD , Series, DC60xu. 2100DHCT, 3100DHCT,3250HD,
- Not Compatible with: Verizon QIP 6416-2, 6000 series Motorola DCX3200-M, DCX3400 DISH, Direct TV, AV STEREO RECEIVERS (HK and other) OR IR REPEATER SYSTEMS, or directly plugged into TV’s.
- Not Compatible with: Charter/Spectrum and an Arris cable box DCX3510-M
- Not Compatible with: Optimum cable box
- DOES NOT work with COX Mini Box DTA 250HD (Cisco)
NOTE: Not for use in TV (Smart) IR port. The IR port on TV monitors are IR OUT not IR IN
Smallest Size – at 21mm x 12mm this is by far the smallest less obtrusive IR Receiver.
Additional Details -
- Full IR Frequency range for todays technology at 38Khz and 56Khz. With a supporting distance of 40ft @38KHz and 25ft @56 KHz.
- Scientific Atlanta Boxes 46XX Series (Will not work with 4200 and 8200, 8300 Series)
- REPLACES Cisco/Scientific Atlanta IR Extender 1004648,4029013,4022323
- Works with Verizon Fios Cable boxes model QIP, CHS, IPC, VMS series except QIP6xxx and QIP2500, also works with DTA271, DTA50 etc
Technical Information
- Tip - Is 5V
- Ring is Signal
- Sleeve is Ground
Installation
- In most cases just plug it in and it works.
- In the event it does not respond, all you need to do is to unplug the Cable / Satellite / Set top Box, for about 30 seconds and then plug it back in then it will recognize the IR Receiver.
Important Message
AVOID RETURNS: USE ONLY WITH CABLE BOXES WITH AN ACTIVE IR IN PORT LABELED IR IN OR EXT. IR LOCATED ON THE BACK OF THE CABLE BOX. If the box is listed as compatible but does not work when plugged in try unplugging the power from the cable box for 30 seconds while keeping the receiver plugged into the back of the box. The box will reboot. All units are bench tested and working before leaving the factory.